Français
Deutsch
Italiano
Русский
Español
Português
Nederlandse
Ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
Indonesia
Tiếng Việt
ไทย
বাংলা
فارسی
Polski
1.725MW 10kV Containerized Energy Storage Power Conversion System with Transformer Isolation
1.725MW 10kV Containerized Energy Storage Power Conversion System.
Designed as a MW-class power conversion unit for energy storage project integration, this containerized system provides a 1000–1500V DC operating range and 1725kW rated DC-side power, together with a 1725kVA, 10kV AC-side interface and transformer isolation.
A 1.725MW Power Block for Larger Energy Storage Projects
In large energy storage projects, the power conversion section must be matched to both the battery-side DC voltage and the site's AC connection requirements. This unit operates across a 1000–1500V DC range and provides 1725kW rated power on the DC side.
The AC side is rated at 1725kVA and 10kV, allowing the unit to serve as a medium-voltage power conversion block within a larger energy storage system architecture.
High-Voltage DC Battery-Side Interface
The DC side supports an operating voltage range of 1000V to 1500V with a maximum current of 1808A. These parameters should be checked against the battery system DC architecture during project design.
Because battery energy capacity in kWh is not specified in this parameter sheet, the product is presented here according to its power conversion and grid interface parameters rather than as a fixed-capacity battery system.
Core Technical Specifications
Swipe left or right to view the complete specification table.
| Section | Parameter | Specification |
|---|---|---|
| DC Side | Operating Voltage Range | 1000–1500V |
| DC Side | Rated Output Power | 1725kW |
| DC Side | Maximum Current | 1808A |
| AC Side | Rated Output Power | 1725kVA |
| AC Side | Rated AC Voltage | 10kV |
| AC Side | Isolation Mode | Transformer Isolation |
| AC Side | Total Harmonic Distortion | ≤3% at Rated Power |
| AC Side | Power Factor | -1 to +1 Adjustable |
| System | Cooling Mode | Air Cooling |
| System | Operating Temperature | -25°C to +50°C |
| System | Working Altitude | ≤2000m |
| System | Dimensions | 6058 × 2438 × 2896mm |
| System | Net Weight | Approx. 9T |
Battery and Dispatch Communication
Large energy storage projects require communication between the battery system, power conversion equipment and project control platform. The system provides separate interfaces for battery communication and dispatch communication.
Transformer-Isolated 10kV AC Architecture
Transformer isolation is specified on the AC side, with rated AC voltage of 10kV. The system also provides an adjustable power factor range from -1 to +1 and maximum total harmonic distortion of no more than 3% at rated power.
These parameters are relevant when matching the power conversion unit to the electrical architecture and grid-side requirements of an energy storage project.
Container Footprint and Site Planning
The container dimensions are 6058 × 2438 × 2896mm with an approximate net weight of 9 tonnes. Air cooling is specified for system cooling.
The operating temperature range is -25°C to +50°C, while the specified working altitude is up to 2000m. These values should be considered together with the available installation area and project operating environment.
Frequently Asked Questions
Is this a 1.725MW or 1725MW energy storage system?
The technical specification lists rated DC-side power of 1725kW, which equals 1.725MW. The product should therefore be treated as a 1.725MW-class power conversion system rather than a 1725MW system.
Does the 1.725MW energy storage system provide a 10kV AC interface?
Yes. The AC side is specified at 1725kVA with a rated AC voltage of 10kV.
What battery voltage range can be connected to the system?
The specified DC operating voltage range is 1000V to 1500V, with a maximum DC current of 1808A. The battery-side configuration should be matched to these electrical limits.
Does this 1.725MW unit include a fixed battery capacity?
The technical parameter sheet does not specify battery energy capacity in kWh. The product is defined by its power conversion, DC input and 10kV AC-side parameters, so the battery configuration should be confirmed separately for the project.
Does the system include transformer isolation?
Yes. Transformer isolation is listed as the AC-side isolation method.
Can the system communicate with an EMS or dispatch platform?
The specified dispatch communication interfaces include Modbus RTU, Modbus TCP and IEC 60870-5-104. Final protocol compatibility should be checked against the project's EMS or dispatch system.
What is the difference between the 1.25MW and 1.725MW configurations?
Both configurations use a 1000–1500V DC operating range, 10kV AC interface and transformer isolation. The 1.725MW configuration increases rated DC-side power to 1725kW and rated AC-side power to 1725kVA, with a larger container footprint and higher net weight.
What information should be provided before selecting a 1.725MW energy storage power conversion system?
Project information should include required power, battery-side DC voltage range, AC grid voltage, communication requirements, site temperature, altitude and available installation space. These values can then be checked against the technical specifications.
Match a 1.725MW Power Block to Your Energy Storage Project
Provide your required system power, battery DC voltage range, AC grid voltage, communication protocol and site operating conditions. The 1.725MW power conversion configuration can then be evaluated against the project requirements.
Discuss Your 1.725MW Energy Storage Project1.725MW Energy Storage Power Conversion System
,10kV AC Interface Containerized Energy Storage System
,Transformer Isolation MW-Class Power Conversion Unit
Customer Service
- Email: info@voltertechenergy.com
- Tel: +86 13600078043
- WhatsApp: 8613600078043
-
WeChat:
voltertech
-
1.25MW 10kV Transformer-Isolated Energy Storage Container for Medium-Voltage AC-Side Energy Storage Unit
1.25MW 10kV AC-Side Transformer-Isolated Energy Storage Container . This AC-side containerized energy storage unit is rated at 1250kW on the DC side and 1250kVA on the AC side, with a DC operating voltage range of 1000–1500V and rated AC voltage of 10kV. The system uses transformer isolation and ... -
46.08kWh 12kW Solar ESS System All In One With Dual AC Output
46.08kWh 12kW All in One Solar Energy Storage System with Dual AC Output This all in one solar energy storage system combines a 46.08kWh LiFePO4 battery bank, 12kW pure sine wave inverter, dual MPPT charging and two AC output channels. It offers a larger stored-energy reserve while retaining a ... -
6kW 16kWh All In One Home Energy Storage System With Dual MPPT
6kW 16kWh All In One Energy Storage System with Dual MPPT for Home Backup Integrated Solar Storage for Residential Projects This 6kW 16kWh all in one energy storage system integrates a hybrid inverter, battery storage, dual MPPT solar charging, system communication and WiFi monitoring within one ...
