30kWh 15kVA Air-Cooled Commercial Battery Storage System for Small Business Peak Shaving

Product Summary
30kWh commercial battery storage for small business peak shaving and demand charge reduction. 15kW on/off-grid PCS, air-cooled LiFePO4, 6000 cycles, IP54, optional 15kW PV input, 3-unit parallel. For shops, offices, clinics and restaurants. OEM available.
Basic Properties
Place of Origin: China
Brand Name: Voltertech
Certification: IEC62477-1 , IEC61000-6/2/4 , UN3536
Model Number: BESS-30KWH-15KW-W-4
Trading Properties
Minimum Order Quantity: 1 Unit
Price: Negotiable
Payment Terms: L/C,T/T,Western Union
Supply Ability: 5000 Units per Month
Product Description

30kWh Battery Storage for Small Business Peak Shaving

For a small commercial customer, the electricity bill is often shaped by a handful of short peaks — air conditioners starting together, refrigeration compressors cycling, or a workshop tool drawing hard for a few minutes.

In many markets, those peaks set the demand charge for the whole month. A business can pay a premium based on a load that lasted minutes, not hours.

The Voltertech BESS-30KWH-15KW-W is a compact battery storage system built to shave those peaks. It combines 30kWh of LiFePO4 storage with a 15kVA on/off-grid PCS in a single air-cooled cabinet, sized for shops, offices, clinics, restaurants and small facilities that want lower demand charges without a large industrial installation.

Key Advantages for Small Commercial Sites

30kWh in One Cabinet A complete storage system in an 802 × 1028 × 1890mm enclosure — small enough for a shopyard, service area or plant room.
15kVA Peak Coverage Rated output sized to cover the short, high-load events that drive demand charges in small commercial facilities.
Optional Solar Input Up to 15kW + 15kW of PV can be connected, letting the battery recharge from rooftop solar as well as the grid.

How Peak Shaving Reduces a Business Electricity Bill

Demand charges are based on the highest power drawn during a billing period, usually measured in 15 or 30-minute intervals. Keeping that maximum low can matter as much as reducing total consumption.

A battery sits between the grid and the site's loads. When demand spikes above a set threshold, the battery discharges to cover the difference — so the grid never sees the full peak. It then recharges slowly when site demand is low, or from solar during the day.

Sizing Note: Peak shaving depends on power and timing, not just energy. The 15kVA rating covers short peaks; the 30kWh capacity determines how long the system can hold them down before needing to recharge.

When a 30kWh System Makes Business Sense

This capacity class fits sites whose peaks are significant but whose total consumption does not justify a large industrial cabinet. Typical examples include retail shops with refrigeration, small offices with heavy HVAC, clinics with continuous equipment, and restaurants with cooking and cold-storage loads.

It is also a practical size for installers serving small commercial customers: the cabinet can be delivered, positioned and commissioned with standard site equipment, and three units can run in parallel where a customer needs more capacity later.

Operating Scenarios

Peak Shaving on the Grid

The battery discharges during short demand spikes, keeping the site's grid draw below the level that triggers demand charges.

Solar Self-Consumption

With optional PV connected, midday solar charges the battery and supplies the site, covering part of the evening load from stored energy.

Backup for Essential Loads

With STS transfer and off-grid output, the same cabinet keeps selected circuits running during a grid interruption.

Air Cooling for Small Commercial Installations

This system uses air cooling rather than a liquid loop. For a 30kWh cabinet, that is a practical match: the heat load is manageable with forced air, and the design avoids the pumps, coolant and maintenance points of a liquid system.

For distributors and installers, air cooling simplifies servicing and keeps the equipment approachable for technicians who maintain small commercial sites.

Core Technical Specifications

Swipe left or right to view the complete specification table.

Parameter Specification
Model BESS-30KWH-15KW-W
System Type Air-Cooled Commercial Battery Storage System
Battery Chemistry LiFePO4
Total Capacity 30kWh
Nominal Capacity (Cell) 100Ah
Nominal Voltage 307.2V
Operating Voltage Range 259.2V – 345.6V
Nominal Charge / Discharge Current 50A
PCS Rated Output (On-Grid / Off-Grid) 15kVA
Max. Output Power (Off-Grid) 16.5kVA
Rated AC Voltage AC 230/400V, 50/60Hz
Rated AC Current (On-Grid) 22A
Max. PV Input Power (2 Channels) 15kW + 15kW (Optional)
MPPT Voltage Range 200V – 800V
Maximum PV Voltage 850V
STS Function Supported
Maximum Efficiency 97.8%
Cooling Mode Air Cooling
Cycle Life / Calendar Life 6000 Cycles / 15 Years
Operating Temperature -20°C to +50°C
Enclosure Protection IP54
Communication LAN / RS485 / CAN
Dimensions (L × W × H) 802 × 1028 × 1890mm
Net Weight Approx. 700kg

System Planning and Installation

Bill and Load Review
Obtain the site's electricity bill and demand history. The peak kW recorded there sets the target for the battery's discharge power and duration.
Threshold Setting
Set the discharge threshold to cap grid draw at the agreed level. The correct setting depends on how the local utility defines its demand-charge interval.
Solar Integration
Where PV is planned, verify string voltage against the 200–800V MPPT range before the array layout is fixed. PV input is optional.
Site Conditions
The cabinet measures 802 × 1028 × 1890mm and weighs approximately 700kg. Confirm floor loading, access and ventilation clearance at the installation point.
System Expansion
Up to 3 units can operate in parallel for sites with higher peaks or longer backup requirements.

Typical Small Business Applications

Retail Shops and Supermarkets

Shaving refrigeration and HVAC peaks that inflate demand charges, with the option to add rooftop solar later.

Small Offices and Clinics

Reducing peak draw from air conditioning and continuous equipment while keeping essential circuits available during outages.

Restaurants and Food Service

Covering cooking and cold-storage peaks, where short high-load events drive monthly charges.

Small Workshops and Service Facilities

Managing the starting current of tools and machinery within the 15kVA rating, with parallel units available as demand grows.

Frequently Asked Questions

Q1. What is peak shaving, and how does a 30kWh battery help?

Peak shaving means supplying short periods of high demand from the battery instead of the grid. By lowering the maximum power drawn from the utility, the site can reduce demand charges on its monthly bill.

Q2. Is 15kVA enough to make a difference to a business bill?

For small commercial sites, many demand charges are driven by load spikes in the 10–20kW range. A 15kVA output is sized to cover that kind of peak. The right answer depends on the site's recorded maximum demand.

Q3. How long can the battery shave a peak?

It depends on the load above the threshold and the 30kWh capacity. Higher excess demand drains the battery faster. The system recharges when site load falls or from solar during the day.

Q4. Can this cabinet also store solar energy?

Yes. PV input is optional, with two channels rated at 15kW + 15kW and an MPPT range of 200–800V. Stored solar can serve evening loads or support peak shaving.

Q5. Why air cooling instead of liquid cooling?

At 30kWh, the heat load is modest enough for forced-air cooling. It avoids the pumps and coolant of a liquid loop and keeps servicing simpler for small commercial technicians.

Q6. Can the system provide backup power as well?

Yes. It supports STS transfer and off-grid output at AC 230/400V, so selected circuits can keep running during a grid interruption. Backup sizing is planned separately from peak shaving.

Q7. What information is needed for a quotation?

Please provide the destination country, a recent electricity bill showing demand charges, the site's peak load in kW, planned solar capacity if any, which loads need backup, and the required quantity.

Planning Peak Shaving for Small Business Customers?

Voltertech supplies air-cooled commercial battery storage for distributors, installers and small commercial projects. Share a sample electricity bill and the site's peak load for sizing and quotation.

OEM and ODM options are available for bulk orders and regional distribution programs.

Request 30kWh BESS Details & Quotation
Product Details
Highlight:

30kWh Commercial Battery Storage System

,

15kVA Commercial Energy Storage System

,

Air-Cooled Commercial BESS

Application: Small Business Peak Shaving
Target Buyers: Distributors, Installers, SMB
Site Types: Shop / Office / Clinic / Restaurant
Capacity: 30kWh / 15kVA PCS
Cooling: Air Cooling
PV Input: 15kW + 15kW Optional
Parallel: Up To 3 Units
Supply Type: OEM / ODM / Wholesale

Customer Service

Related Products
Send An Inquiry