3.44MWh Liquid-Cooled DC-Side Containerized Battery Storage System for Utility-Scale BESS Container Projects
3.44MWh Container Battery Storage for Utility-Scale Renewable Projects
Large renewable projects face a mismatch between when they generate and when the grid needs power. A solar farm peaks at midday, while electricity demand often peaks in the evening. Without storage, that midday surplus is either curtailed or exported at the lowest prices of the day.
The Voltertech BESS-3.44MWH-W is a containerized battery storage system built to shift that energy. It packs 3.44MWh of LiFePO4 storage into a single 40-foot-class container, operating on a 1228.8V DC platform with liquid cooling.
Designed as a DC-side battery container, it pairs with a PCS selected for the project, giving EPC contractors and developers a modular building block for solar farms, wind integration and grid-scale peak management.
Key Advantages for Large Storage Projects
Why Renewable Projects Add Storage
The economic case for grid-scale storage rests on the spread between cheap generation hours and expensive demand hours. Energy stored when supply is abundant can be released when prices — and demand — are highest.
For a solar project, storage also reduces curtailment. When the grid cannot accept the full midday output, the battery absorbs the surplus instead of losing it. The same energy is then delivered during the evening ramp, improving the project's revenue without increasing its generation capacity.
How the Container Fits Into a Project
This system is delivered as a DC-side container. That means the battery, cell monitoring, thermal management and protection are integrated in the enclosure, while the power conversion and grid connection are specified separately for the project.
For developers, this is a flexible arrangement. The same battery container can be matched to different PCS and transformer configurations depending on the site's interconnection requirements, target duration and grid code. Multiple containers can be combined into larger multi-MWh installations.
Operating Scenarios
Solar Farm Energy Shifting
Midday surplus is stored and delivered during the evening peak, converting low-value generation into higher-value dispatch.
Curtailment Reduction
The battery absorbs output the grid cannot accept, preserving energy that would otherwise be lost.
Grid-Scale Peak Management
Storage discharges during peak demand periods and recharges during off-peak hours, supporting grid stability and market participation.
Thermal Management and Container Design
At the megawatt-hour scale, temperature control is a performance requirement, not a convenience. Cell temperature directly affects usable capacity, charge acceptance and long-term degradation.
The liquid cooling system holds cell temperature within a controlled band through repeated high-power charge and discharge cycles. The container is rated IP54 for outdoor deployment and operates from -20°C to +60°C, suiting sites from temperate to hot climates.
Core Technical Specifications
Swipe left or right to view the complete specification table.
| Parameter | Specification |
|---|---|
| Model | BESS-3.44MWH-W |
| System Type | Liquid-Cooled Containerized Battery Storage (DC Side) |
| Battery Chemistry | LiFePO4 |
| Total Capacity | 3.44MWh |
| Nominal Capacity (Cell) | 280Ah |
| Nominal Voltage | 1228.8V |
| Operating Voltage Range | 1036V – 1401V |
| Nominal Charge / Discharge Current | 140A |
| PCS / Power Conversion | Project-configurable |
| Cooling Mode | Liquid Cooling |
| Cycle Life / Calendar Life | 8000 Cycles / 15 Years |
| Operating Temperature | -20°C to +60°C |
| Storage Temperature | -30°C to +45°C |
| Operating Humidity | 5% – 95% |
| Working Altitude | ≤ 2000m |
| Enclosure Protection | IP54 |
| Communication | LAN / RS485 / CAN |
| Dimensions (L × W × H) | 6058 × 2600 × 2896mm |
| Net Weight | Approx. 34 T |
System Planning and Integration
Typical Utility-Scale Applications
Solar Farms and PV Parks
Shifting midday generation into the evening and reducing curtailment, improving project revenue per megawatt-hour.
Wind and Renewable Integration
Smoothing variable output and storing excess generation for dispatch during low-resource periods.
Grid-Scale Peak Shaving and Energy Arbitrage
Charging during low-price hours and discharging during high-price peaks in electricity markets.
Multi-MWh EPC Projects
A standardized container block for developers delivering repeatable large-scale storage installations.
Frequently Asked Questions
Q1. What kind of project is a 3.44MWh container suited to?
Utility-scale and grid-scale projects — solar farms, wind integration, peak shaving and energy arbitrage — where energy is stored in the megawatt-hour range and dispatched on a daily cycle.
Q2. What does "DC-side container" mean?
The container integrates the battery, monitoring, thermal management and protection. The power conversion system (PCS) and grid connection are specified separately for the project, allowing the same container to match different PCS and transformer configurations.
Q3. How long can one container discharge?
Duration depends on the PCS power it is paired with. As a reference, one 3.44MWh container matched with a 1MW-class PCS provides roughly three hours of discharge, subject to system design and losses.
Q4. Why is liquid cooling used at this scale?
At the megawatt-hour level, cell temperature must be tightly controlled to preserve capacity, charge acceptance and cycle life during daily high-power operation. Liquid cooling manages that more precisely than forced air.
Q5. Can several containers be combined into a larger system?
Yes. Multiple containers can be deployed together to build multi-MWh installations, coordinated through the LAN, RS485 and CAN communication interfaces.
Q6. Is this system for on-grid or off-grid use?
As a DC-side container, the system's grid-interactive or off-grid behavior is defined by the PCS and overall project design rather than by the battery container itself. Both are supported in suitable configurations.
Q7. What information is needed for a project quotation?
Please provide the destination country, project type, required storage capacity in MWh, target discharge duration, grid voltage and interconnection requirements, site conditions, and the number of containers required. A single-line diagram helps with the PCS and transformer configuration.
Developing a Utility-Scale Storage Project?
Voltertech supplies liquid-cooled containerized battery storage for EPC contractors, developers and utility-scale renewable projects. Share your capacity and duration requirements for system configuration and quotation.
OEM options are available for regional partners and multi-container project deployments.
Request 3.44MWh BESS Details & Quotation3.44MWh Containerized Battery Storage System
,Liquid-Cooled Battery Energy Storage System
,DC-Side BESS Container
-
6kW Hybrid Solar Inverter with 48V Battery Support for Retrofit Projects and Single-Phase Solar Upgrades
The Voltertech INV-6KW-51.2V-W is a 6kW single-phase hybrid solar inverter with dual MPPT, up to 9kW PV input and IP65 protection. Designed for compatible 48V-class battery systems, it supports solar upgrades, battery integration and hybrid power applications. -
2.5MW 10kV Transformer-Isolated Power Conversion System for Hybrid Solar Energy Storage
2.5MW 10kV Hybrid Solar Energy Storage Power Conversion System The Voltertech BESS-25MW-W is a 2.5MW transformer-isolated power conversion unit for MW-scale hybrid solar and battery storage projects. It connects compatible 1000–1500V DC battery systems to a 10kV medium-voltage AC network and ... -
215kWh 100kW Liquid Cooling Hybrid C&I Energy Storage System for Solar Diesel Projects
215kWh 100kW Hybrid C&I Energy Storage for Solar Diesel Systems The 215kWh 100kW Hybrid C&I Energy Storage for Solar Diesel Systems is designed for commercial and industrial projects that need to coordinate battery storage with solar PV, the utility grid and diesel generation. The system combines ...