Français
Deutsch
Italiano
Русский
Español
Português
Nederlandse
Ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
Indonesia
Tiếng Việt
ไทย
বাংলা
فارسی
Polski
2.5MW 10kV Transformer-Isolated Power Conversion System for Hybrid Solar Energy Storage
2.5MW 10kV Hybrid Solar Energy Storage Power Conversion System
The Voltertech BESS-25MW-W is a 2.5MW transformer-isolated power conversion unit for MW-scale hybrid solar and battery storage projects. It connects compatible 1000–1500V DC battery systems to a 10kV medium-voltage AC network and supports battery, EMS and plant dispatch communication.
2.5MW PCS for Large Hybrid Solar Projects
For large solar-plus-storage plants, the battery system requires a power conversion stage that matches both the high-voltage DC battery architecture and the medium-voltage project network.
The BESS-25MW-W provides 2.5MW-class conversion capacity for projects where PV generation, battery storage and grid operation are coordinated through an EMS or plant-level control system.
Key Specifications
| Model | BESS-25MW-W |
|---|---|
| DC Operating Voltage | 1000–1500V |
| Rated DC Power | 2500kW |
| Maximum DC Current | 2619A |
| Rated AC Output | 2500kVA |
| Rated AC Voltage | 10kV |
| Rated AC Current | 145A |
| Isolation Mode | Transformer Isolation |
| Total Harmonic Distortion | ≤3% at Rated Power |
| Power Factor | -1 to +1 Adjustable |
| Cooling Method | Air Cooling |
| Operating Temperature | -25°C to +50°C |
| Storage Temperature | -25°C to +55°C |
| Operating Humidity | 0%–95% |
| Working Altitude | ≤2000m |
| Battery Communication | CAN / RS485 |
| Dispatch Communication | Modbus RTU / Modbus TCP / IEC 60870-5-104 |
| Dimensions | 5523 × 2400 × 2800mm |
| Net Weight | Approx. 15T |
Matching 2.5MW PCS Power with Battery MWh
The 2.5MW rating defines power conversion capacity, while the battery energy requirement is specified separately in MWh. This means two projects using the same 2.5MW PCS can require different battery capacities depending on the desired operating duration.
- Confirm the required charge and discharge power
- Define the target storage duration
- Calculate the required battery MWh capacity
- Verify the battery operates within the 1000–1500V DC range
- Check the 10kV grid connection requirements
This separation between MW power and MWh energy capacity is important when configuring a solar-plus-storage system.
10kV Medium-Voltage Connection
The AC side is rated at 2500kVA and 10kV, providing a medium-voltage interface for large hybrid solar and battery storage projects.
Transformer isolation is included in the electrical architecture. The specified power factor can be adjusted from -1 to +1, while AC total harmonic distortion is rated at no more than 3% at rated power.
Battery, EMS and Dispatch Integration
A MW-scale hybrid solar system typically needs coordinated control between PV generation, battery storage, PCS and grid operation. The BESS-25MW-W provides communication interfaces for both battery-side control and project-level dispatch.
- CAN / RS485 for battery-side communication
- Modbus RTU for compatible control equipment
- Modbus TCP for network communication
- IEC 60870-5-104 for compatible dispatch systems
Final EMS and SCADA compatibility should be confirmed according to the project's control architecture.
Typical Applications
2.5MW power conversion for large PV and battery storage plants.
Medium-voltage battery conversion for large hybrid industrial power systems.
High-power PCS integration between battery storage and a 10kV network.
Transformer-isolated conversion for high-voltage battery energy storage systems.
Frequently Asked Questions
1. What battery capacity should be paired with a 2.5MW PCS?
The required battery capacity depends on the target storage duration and usable energy requirement. The PCS rating is 2.5MW, while battery capacity should be calculated separately in MWh for the specific project.
2. Can this 2.5MW PCS be used in a solar-plus-storage plant?
Yes. It can form the battery power conversion section of a compatible MW-scale PV + BESS system, working with the battery, EMS and other plant equipment according to the project design.
3. What battery DC voltage is required?
The specified DC operating range is 1000–1500V with a maximum current of 2619A. The battery system should be engineered so its operating voltage and current remain within these limits.
4. Is the 2.5MW rating the same as battery capacity?
No. MW measures power, while MWh measures stored energy. A 2.5MW PCS can therefore be combined with different battery energy capacities depending on the required discharge duration and project strategy.
5. Can the system connect to a 10kV network?
The AC interface is rated at 2500kVA and 10kV with transformer isolation. Final grid connection, protection and compliance requirements should be confirmed according to the project location and electrical design.
6. What project data is needed before selecting this PCS?
Provide the PV capacity, required charge and discharge power, battery MWh capacity or target duration, battery DC voltage, grid voltage, communication requirements, site temperature, altitude and project location.
Planning a 2.5MW Hybrid Solar + BESS Project?
Voltertech supports solar developers, EPC contractors and system integrators with MW-scale battery power conversion and energy storage solutions.
Send us your PV capacity, PCS power, battery MWh or target discharge duration, DC voltage and 10kV grid requirements so our team can evaluate the project configuration.
2.5MW Power Conversion System
,10kV Energy Storage System
,Transformer-Isolated Battery Conversion Block
Customer Service
- Email: info@voltertechenergy.com
- Tel: +86 13600078043
- WhatsApp: 8613600078043
-
WeChat:
voltertech
-
125kW 261kWh Liquid Cooled Industrial Battery Storage System for Commercial Energy Management
125kW 261kWh Liquid Cooled Industrial Battery Storage System . Designed for commercial and industrial sites with higher power demand, this liquid cooled battery storage system combines 125kW rated output with 261kWh of energy capacity. It is suitable for industrial peak load management, solar energy ... -
215kWh Liquid Cooled Commercial Battery Energy Storage System for Peak Shaving and C&I Applications
215kWh Liquid Cooled Commercial Battery Energy Storage System . Designed for commercial and industrial energy storage projects, this cabinet-based system combines high-capacity LiFePO4 battery storage, liquid thermal management and power conversion capabilities in one solution. It is suitable for ... -
10.24kWh Wall Mount LiFePO4 Battery For Extended Solar Backup Systems
10.24kWh Wall Mounted LiFePO4 Battery for Extended Solar Backup Systems More Stored Energy Without a Floor-Standing Battery Cabinet This 10.24kWh wall mounted LiFePO4 battery is designed for residential solar projects that need more storage capacity than a standard 5kWh-class battery while keeping ...
