10.24kWh 51.2V 200Ah Wall Mounted LiFePO4 Solar Storage Battery with Parallel Expansion for Residential Energy Storage

10.24kWh 51.2V 200Ah Wall Mounted LiFePO4 Solar Storage Battery.

Designed for low-voltage residential energy storage, this 51.2V LiFePO4 battery provides 200Ah nominal capacity and 10.24kWh nominal energy in a single unit. RS485 and CAN communication are provided for inverter integration, while parallel expansion allows the storage capacity to be increased when a larger home energy system is required.

10.24kWh in One Residential Battery

The battery combines 51.2V nominal voltage with 200Ah nominal capacity, providing 10.24kWh of nominal stored energy. This gives residential solar projects a 10kWh-class battery configuration without requiring multiple smaller battery modules to reach the same nominal capacity.

Actual backup time depends on the connected load, inverter efficiency, battery operating limits and reserve settings, so system sizing should be based on the household's real power consumption rather than battery capacity alone.

Designed for Home Solar and Low-Voltage Energy Storage

The product specification identifies solar storage and household electricity among the intended application scenarios. The battery uses LiFePO4 chemistry and provides RS485 and CAN communication for integration with compatible inverter systems.

Expandable for Higher Storage Capacity

For projects requiring more than one 10.24kWh battery, the system supports parallel expansion of up to 15 units according to the product specification.

Core Technical Specifications

Swipe left or right to view the complete specification table.

RS485 and CAN Inverter Communication

The battery provides RS485 and CAN communication interfaces. The parameter sheet lists compatibility with multiple inverter brands, but the communication protocol and inverter model should be confirmed before ordering because compatibility can vary between different inverter series and firmware versions.

For project matching, providing the inverter brand and exact model allows the required communication configuration to be checked before shipment.

Battery Documents and Cell Certifications

The parameter sheet lists UN38.3 and MSDS documentation for the battery, while UL1642 and IEC62133 are listed for the battery cells. Shipping classification is specified as UN3480, Class 9.

Frequently Asked Questions