Français
Deutsch
Italiano
Русский
Español
Português
Nederlandse
Ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
Indonesia
Tiếng Việt
ไทย
বাংলা
فارسی
Polski
100kW 233kWh Liquid Cooled Commercial Energy Storage System for C&I Applications
100kW 233kWh Liquid Cooled C&I Battery Energy Storage System.
Built around a 100kW power conversion platform and 233kWh LiFePO4 battery capacity, this system combines liquid cooled battery storage with photovoltaic input, grid-connected and off-grid operation, and diesel generator linkage. The configuration provides a higher energy capacity while maintaining a 100kW rated output platform.
233kWh Energy Capacity on a 100kW Power Platform
Power and energy capacity describe two different parts of an energy storage system. The 100kW rating determines the rated output power, while the 233kWh battery capacity determines how much nominal energy is available in the battery system.
Based on the nameplate values, 233kWh divided by 100kW gives an energy-to-power ratio of approximately 2.33 hours. This provides a useful reference when comparing different C&I storage configurations with the same power rating but different battery capacities.
Hybrid Energy Inputs for C&I Power Systems
The specification includes photovoltaic input together with battery storage and diesel generator linkage. This allows the system to form part of a hybrid commercial or industrial power architecture where more than one energy source is available.
Core Technical Specifications
| Battery Chemistry | LiFePO4 |
| Battery Capacity | 233kWh |
| Nominal Voltage | 832V |
| Battery Voltage Range | 702V – 936V |
| Charge / Discharge Current | 140A / 140A |
| Cooling Method | Liquid Cooling |
| Cycle Life | 8,000 Cycles |
| Rated PCS Output | 100kW |
| Grid AC Voltage | 380 / 400V, 50 / 60Hz |
| Maximum PV Power | 156kW (2 Channels) |
| STS Handover Time | 20ms |
| Protection Level | IP54 |
| Dimensions | 1385 × 910 × 2203mm |
| Net Weight | Approx. 2.3T |
Grid-Connected and Off-Grid Power Conversion
The PCS is listed as an optional configuration. For grid-connected operation, the specification provides 100kW rated output at AC 380/400V and 50/60Hz.
For off-grid operation, the PCS is also rated at 100kW, with listed output voltage options of 220V, 230V, 380V and 400V. The specification additionally supports up to three units operating in grid-connected or off-grid parallel configurations.
Liquid Cooled 832V Battery Platform
The battery system uses 280Ah LiFePO4 cells with a nominal voltage of 832V and an operating voltage range of 702V to 936V. Nominal charging and discharging current are both rated at 140A.
Liquid cooling is specified for battery thermal management. The battery data lists 8,000 cycles and a calendar life of 15 years.
Frequently Asked Questions
Is a 100kW 233kWh battery storage system suitable for a factory?
Suitability depends on the site's peak load, daily electricity consumption and required discharge duration. The system provides 100kW rated PCS output and 233kWh nominal battery capacity, so actual project sizing should be based on the facility's load profile.
Can this 233kWh energy storage system be used for peak shaving?
The battery system can charge and discharge according to the project operating strategy. Whether it is suitable for a specific peak shaving application depends on the site's peak demand, duration of the peak period and required power output.
Can a commercial solar PV system be connected to this battery storage system?
Yes. The technical specification includes photovoltaic input and lists a maximum PV power of 156kW across two channels.
Can the 100kW 233kWh system operate off-grid?
Yes. The optional PCS specification includes off-grid operation with 100kW rated output and output voltage options of 220V, 230V, 380V and 400V.
Can this commercial battery system work with a diesel generator?
Yes. Diesel generator linkage is included in the technical specification, allowing the system to be considered for hybrid power configurations involving PV, battery storage, grid power and diesel generation.
How long can a 233kWh battery run at 100kW?
Based on nominal values, 233kWh divided by 100kW gives approximately 2.33 hours. Actual discharge duration depends on usable battery capacity, system losses, operating limits and the real load profile.
Can multiple 100kW 233kWh energy storage systems be connected in parallel?
The technical specification supports up to three units in grid-connected or off-grid parallel operation.
What information is needed to select the right C&I battery storage system?
Useful project information includes peak load in kW, daily electricity consumption in kWh, grid voltage and frequency, solar PV capacity, required operating mode and whether diesel generator linkage is required.
Configure Your 100kW / 233kWh Energy Storage System
Provide your required operating mode, load power, grid voltage, solar PV capacity and whether diesel generator linkage is required. The battery and optional PCS configuration can then be matched to the project requirements.
Discuss Your C&I Energy Storage Project100kW Commercial Energy Storage System
,233kWh C&I Battery Energy Storage System
,Liquid Cooled Battery Storage
Customer Service
- Email: info@voltertechenergy.com
- Tel: +86 13600078043
- WhatsApp: 8613600078043
-
WeChat:
voltertech
-
2.56kWh 25.6V Wall Mounted LiFePO4 Battery With CAN RS485 Communication
2.56kWh 25.6V Wall Mounted LiFePO4 Battery with CAN RS485 Communication This wall mounted LiFePO4 battery provides 2.56kWh of nominal energy on a 25.6V, 100Ah platform. It is designed for home solar storage, UPS backup, communication equipment and other low-voltage projects that require compact ... -
5.12kWh Stackable LiFePO4 Battery Residential Solar Battery Storage
5.12kWh Stackable LiFePO4 Battery for Residential Solar Energy Storage Build a Residential Energy Storage System Around Actual Home Demand This 5.12kWh stackable LiFePO4 battery is designed as the storage component of a compatible residential energy storage system. Its 51.2V and 100Ah electrical ... -
10.24kWh Modular Home Battery Bank With Two 5.12kWh LiFePO4 Modules
10kWh Stackable LiFePO4 Battery System 51.2V 200Ah Dual Module Engineered as the optimal starting point for comprehensive residential energy independence, the HB PRO Series 10kWh stackable system integrates two high-performance 5.12kWh LiFePO4 modules into a seamless vertical tower. By utilizing an ...
