233kWh Liquid Cooled Commercial Battery Energy Storage System with 100kW PCS for EV Charging Sites
233kWh Battery Storage for EV Charging Stations and Commercial Solar
EV charging sites are growing fast, but the grid is not always growing with them. Many promising charging locations — fuel stations, commercial parking lots, roadside service areas — face limited grid connection capacity, long waits for upgrades, or expensive demand charges that make fast charging uneconomical.
The Voltertech BESS-233KWH-105KW-W is a commercial battery storage system designed for these sites. It stores 233kWh of energy and delivers it through a 100kW PCS, buffering charging power so a site can serve DC fast chargers without immediately expanding its grid connection. Combined with rooftop or canopy solar, the same cabinet turns a charging site into a partially self-powered operation.
The system uses an 832V LiFePO4 battery platform with liquid cooling, rated for 8000 cycles and a 15-year design life — specifications suited to the daily cycling pattern of a working charging station.
Key Advantages for Charging Site Projects
Why Charging Sites Add Battery Storage
A DC fast charger can pull 60–120kW or more for twenty to forty minutes per vehicle. For a site with two or more chargers, that profile creates two business problems: the grid connection must be sized for the theoretical maximum, and utility demand charges are calculated from the highest peak, however brief.
Stationary storage changes the equation. The battery charges steadily from the existing grid connection — or from solar — and discharges at high power during charging sessions. The site sees a smoother, lower peak. In many markets this means a charging project can open earlier, with a smaller grid upgrade, and pay lower demand charges from day one.
Storage Plus Solar at the Charging Site
Solar canopies over parking bays are an increasingly common feature at charging locations, but solar generation peaks at midday while charging demand often peaks in the late afternoon and evening. Without storage, much of the midday solar output has nowhere to go.
The BESS-233KWH-105KW-W absorbs midday solar energy and releases it during peak charging hours. For site operators, this raises the share of self-generated electricity used on site. For integrators, it makes the storage cabinet the coordination point of a solar-plus-charging project, connecting through LAN, RS485 or CAN interfaces.
Charging Site Operating Scenarios
Buffer Mode for DC Fast Charging
The battery discharges alongside the grid during charging sessions, limiting site peak demand while maintaining charger output.
Solar Self-Consumption Mode
Midday solar generation charges the battery, which then serves evening charging demand, maximizing on-site solar usage.
Demand Charge Management
The system trims site peaks during normal operation, reducing utility demand charges independent of charging activity.
Planning a Charging Site Storage Installation
Core Technical Specifications
Swipe left or right to view the complete specification table.
| Parameter | Specification |
|---|---|
| Model | BESS-233KWH-105KW-W |
| System Type | Liquid-Cooled Commercial Battery Energy Storage System |
| Battery Chemistry | LiFePO4 |
| Total Capacity | 233kWh |
| Nominal Capacity (Cell) | 280Ah |
| Nominal Voltage | 832V |
| Operating Voltage Range | 702V – 936V |
| Nominal Charge / Discharge Current | 140A |
| PCS Rated Output Power | 100kW |
| PCS Rated Operating Voltage | AC 230/400V, 50/60Hz |
| Max. AC Current | 167A |
| Cooling Mode | Liquid Cooling |
| Cycle Life | 8000 Cycles |
| Calendar Life | 15 Years |
| Operating Temperature | -20°C to +60°C |
| Enclosure Protection | IP54 |
| Communication | LAN / RS485 / CAN |
| Dimensions (L × W × H) | 1400 × 1000 × 2399mm |
| Net Weight | Approx. 2.3 T |
Typical Charging Site Applications
Fuel Stations Adding EV Chargers
Existing forecourts adding DC fast chargers without waiting for major grid upgrades, using storage to buffer charging demand within the existing connection.
Commercial and Retail Parking
Shopping centers, hotels and office buildings offering charging to visitors, with storage managing peak demand and pairing with rooftop or canopy solar.
Fleet and Depot Charging
Smaller commercial fleets charging vans and service vehicles overnight or between shifts, with storage smoothing simultaneous charging events.
Roadside and Service Area Charging
Highway service areas and rural charging points where grid capacity is limited and solar generation can meaningfully contribute to site energy.
Frequently Asked Questions
Q1. Why add battery storage to an EV charging station?
Storage buffers charging power, allowing the site to serve fast chargers within a limited grid connection. It can also reduce demand charges and store midday solar energy for evening charging sessions.
Q2. How many vehicles can a 233kWh system support per day?
At roughly 40kWh per passenger EV fast-charging session, 233kWh covers around five full sessions per cycle. Actual figures depend on vehicle types, session depth and how much solar or grid energy refills the battery between sessions.
Q3. Can storage replace a grid connection upgrade?
In many projects it defers or reduces the upgrade rather than eliminating it. Whether storage alone is sufficient depends on daily charging volume and the refill window — both should be checked during system design.
Q4. Can the system work with solar panels at the same site?
Yes. The storage system is designed to coordinate with on-site solar generation, absorbing midday output and releasing it during charging peaks, which raises the share of self-generated electricity used on site.
Q5. What is the difference between this 233kWh model and the 215kWh cabinet?
The 233kWh model offers 8% more storage capacity on a higher-voltage 832V platform, in a slimmer cabinet (1000mm depth) suited to space-constrained sites. Both share the same 100kW PCS class, liquid cooling and cycle-life specifications.
Q6. Can several cabinets be installed together as traffic grows?
Yes. Multiple cabinets can be combined and coordinated through the LAN, RS485 and CAN communication interfaces, allowing the site to scale without redesigning the installation.
Q7. What information is needed for a charging site quotation?
Please provide the destination country, site grid capacity, planned charger quantity and power, expected daily vehicle sessions, available solar area if any, and the number of storage cabinets required. A site layout sketch is helpful for planning.
Developing a Charging Site Storage Project?
Voltertech supplies liquid-cooled commercial battery storage systems for charging infrastructure integrators, EPC contractors and site operators. Share your site grid capacity, charging plan and solar configuration for system design and quotation.
OEM options are available for regional partners and project portfolios.
Request 233kWh BESS Details & Quotation233kWh Commercial Battery Energy Storage System
,Liquid Cooled Commercial BESS
,100kW PCS C&I Energy Storage System
-
233kWh Liquid Cooled Commercial Battery Energy Storage System with 100kW PCS for EV Charging Sites
233kWh liquid-cooled battery storage system for EV charging stations and commercial solar projects. 100kW PCS, 832V LiFePO4 platform, 8000 cycles, 15-year design life. Slim cabinet fits parking and fuel station sites. Buffer charging power, pair with solar, manage demand charges. -
Inverter Protocol Verification Floor Standing Lithium Battery for EPCs & System Integrators in Sheltered Temperature-Controlled Sites
The Voltertech BAT-32KWH-51.2V-W is a 32kWh, 51.2V 628Ah floor-standing LiFePO4 battery featuring an IP54-rated enclosure, CAN/RS485 communication and BMS protection for solar storage projects. -
1.25MW 10kV Medium-Voltage Transformer-Isolated Hybrid Solar Energy System Power Conversion Container
1.25MW 10kV Hybrid Solar Energy System Conversion Container The Voltertech BESS-125MW-W is a 1.25MW transformer-isolated conversion unit designed for MW-scale hybrid solar and battery energy storage projects. It connects a 1000–1500V DC-side energy storage system to a 10kV medium-voltage AC network, ...