10.24kWh 51.2V Rack Mounted Lithium Battery With 150A BMS CAN RS485

10.24kWh 51.2V Rack Mounted Lithium Battery with 150A BMS and CAN RS485

This 10.24kWh rack mounted lithium battery combines a 51.2V, 200Ah energy platform with a 150A BMS configuration. It is positioned for larger residential, telecom, office and small commercial backup systems.

The battery provides stored DC energy and requires a compatible external inverter or PCS. Its larger capacity reduces the number of individual modules needed for projects targeting a 10kWh-class reserve.

More Energy per Rack Battery Position

The 10.24kWh nominal capacity provides twice the energy of a 5.12kWh module. It can simplify systems where rack or equipment-room space is limited but a larger backup reserve is required.

Stored energy should be matched to daily consumption and backup duration. The inverter still determines AC output power and the number of loads that can operate at the same time.

150A BMS Current Platform

The rated charge and discharge current is 75A. Higher current references are listed as 150A continuous and 155A for 10 seconds.

Rated battery power is 3.84kW, with 7.68kW continuous power and 7.94kW for 10 seconds also listed. Inverter demand, cables and protection equipment must remain within the complete battery-system limits.

Data Integration with External Inverters

RS485, RS232 and CAN interfaces provide communication options for compatible inverter platforms. The required protocol should be confirmed before production rather than relying only on the nominal battery voltage.

Bluetooth is optional, while WiFi can be configured for remote battery data. Monitoring requirements should be defined during the quotation stage.

Handling and Equipment-Room Placement

The cabinet measures 613 × 482 × 240mm and weighs approximately 82kg. The rack, shelf or floor structure must be suitable for the equipment weight.

Front cable access supports organized connection planning. The IP21 enclosure requires a dry indoor rack or protected technical location.

10.24kWh Rack Battery Specifications

10kWh Rack Battery FAQ

What does the 150A BMS configuration mean for system selection?

The inverter and electrical components must be selected so their battery-current demand remains within the supported operating limits.

Does 10.24kWh determine the maximum inverter size?

No. Battery energy, battery current and inverter AC power are separate project-selection factors.

What handling preparation is needed for the 82kg battery?

Prepare suitable lifting assistance, a load-rated rack or floor position and clear access to the final installation area.

Can it be added to an existing battery bank?

Only after confirming the existing batteries, BMS settings, communication, age, condition and inverter compatibility.

Which communication option should be specified?

Select the protocol supported by the intended inverter and confirm whether optional wireless monitoring is required.

Match Capacity with Battery Current Demand