1.725MW 10kV Power Conversion System Container with Transformer Isolation for Grid-Scale Energy Storage
1.725MW 10kV PCS Container for Scalable Grid-Scale Energy Storage
Utility-scale storage developers and EPCs often hit the same wall: a single 1.25MW conversion container is not enough for a multi-megawatt project, yet jumping straight to 2.5MW wastes budget on oversized capacity. What they need is an intermediate power class they can deploy, then scale in parallel as the plant grows.
The Voltertech 1.725MW 10kV power conversion system container fills that gap. It delivers 1725kW rated output with a 1000–1500V DC input and transformer isolation, and it is designed for parallel expansion so several units can be combined into a larger AC-coupled energy storage plant.
Built on a 6058×2438×2896mm container platform with air cooling, it supports CAN/RS485 battery communication and Modbus RTU/TCP plus IEC 104 for dispatch, making it ready for integration into utility SCADA and grid-tied storage projects.
Key Advantages for Parallel Grid-Scale Expansion
Choosing the Right Power Class for a Multi-MW Plant
Power conversion containers are typically offered in discrete steps. The choice between 1.25MW, 1.725MW and 2.5MW depends on the battery block size and the project's total target capacity. A 1.725MW unit suits projects where a single 1.25MW unit is slightly undersized but two of them would be oversized — for example when the DC battery block is rated around 1.7–2.0MW.
How Parallel Expansion Works on the AC Side
Each container is a self-contained conversion unit with its own transformer isolation. In a larger plant, multiple containers connect to the same medium-voltage bus, each converting a dedicated battery block's DC power into 10kV AC. This modular approach lets developers add capacity in phases and isolate maintenance without shutting down the whole plant.
Operating Scenarios for the 1.725MW PCS Container
Grid-tied multi-unit storage
Multiple containers in parallel feeding a shared 10kV bus for utility-scale peak shaving and frequency support.
Renewable co-location
Paired with large PV or wind blocks to convert and deliver stored energy to the medium-voltage grid.
Phased capacity build-out
Add PCS containers incrementally as battery capacity or offtake agreements expand.
Battery Block Matching for the 1.725MW PCS
The 1.725MW PCS container accepts a 1000–1500V DC input with a 1808A maximum current, giving it a DC-side capability of roughly 1.8MW at the upper voltage. Match it to a liquid-cooled DC battery container sized near 1.7MW so the PCS is neither oversized nor current-limited. Voltertech's 3.44MWh and 5MWh DC containers can be paired with a 2.5MW or dual PCS arrangement — contact us for the correct block sizing for 1.725MW.
Core Technical Specifications
Swipe left or right to view the complete specification table.
| Parameter | Specification |
|---|---|
| DC Voltage Range | 1000–1500V |
| Rated Power (DC side) | 1725kW |
| Max. Current (DC side) | 1808A |
| Rated Output Power (AC side) | 1725kVA |
| Rated AC Voltage | 10kV |
| Rated AC Current | 68.7A |
| Isolation Mode | Transformer isolation |
| Max. Total Harmonic Distortion | ≤3% at rated power |
| Power Factor | -1 to +1 adjustable |
| Storage Temperature Range | -25℃ to +55℃ |
| Operating Temperature Range | -25℃ to +50℃ |
| Operating RH | 0%–95% |
| Working Altitude | ≤2000m |
| Dimension (L×W×H) | 6058×2438×2896mm |
| Net Weight | ≈9T |
| Cooling Mode | Air cooling |
| Battery Communication Interface | CAN / RS485 |
| Dispatch Communication Interface | Modbus RTU / Modbus TCP / IEC 104 |
System Integration and Project Considerations
The 1.725MW PCS container is supplied as a containerized conversion unit for AC-side integration. The following points matter for EPCs and system integrators planning a multi-unit plant.
Typical Grid-Scale Applications
Utility peak shaving
Parallel PCS containers discharge stored energy during peak demand to flatten load on the medium-voltage grid.
Renewable energy firming
Convert intermittent PV or wind output into dispatchable 10kV power through paired DC battery blocks.
Frequency regulation
Rapid, adjustable power factor and low THD support grid frequency response in grid-scale storage plants.
Industrial co-location
Larger commercial and industrial sites needing more than 1.25MW of conversion capacity in a single container.
Frequently Asked Questions
Q1. Is this a complete energy storage system or just a PCS?
It is a power conversion system (PCS) container, not a battery energy storage system. It converts DC power from an external battery block into 10kV AC and must be paired with a battery container to form a complete storage plant.
Q2. How does 1.725MW differ from the 1.25MW and 2.5MW models?
It sits between them in power (1725kW) and DC current (1808A), with a larger 6058×2438×2896mm enclosure and ≈9T weight, for projects whose battery block falls between the two classes.
Q3. Can multiple PCS containers run in parallel?
Yes. Multiple units can connect to a shared medium-voltage bus to build multi-megawatt AC-side plants, with each unit handling its own battery block.
Q4. What battery voltage does it support?
The DC input range is 1000–1500V with a 1808A maximum current. Confirm the battery block's voltage and power match before finalizing.
Q5. What communication protocols are available for dispatch?
Modbus RTU, Modbus TCP and IEC 104 for grid dispatch, plus CAN/RS485 for battery BMS communication.
Q6. What cooling method does this container use?
Air cooling. Note the supplier's datasheet header lists "liquid cooling" while the cooling field states air cooling — please confirm the exact cooling configuration with our engineers before ordering.
Q7. What details do you need for a quotation?
Please provide the battery block voltage and power, total plant capacity, number of units, grid connection voltage, and project location/altitude so we can confirm the correct configuration.
Planning a Multi-MW Storage Plant?
Tell us your battery block size and total capacity, and we will confirm whether the 1.725MW PCS container — or a parallel arrangement — is the right fit for your project.
Share your project parameters and we will prepare a tailored quotation.
Request 1.725MW PCS Details & Quotation1.725MW Power Conversion System Container
,10kV PCS Container
,Transformer Isolation PCS Container
-
30kWh 15kVA Air-Cooled Commercial Battery Storage System for Small Business Peak Shaving
30kWh commercial battery storage for small business peak shaving and demand charge reduction. 15kW on/off-grid PCS, air-cooled LiFePO4, 6000 cycles, IP54, optional 15kW PV input, 3-unit parallel. For shops, offices, clinics and restaurants. OEM available. -
57.6kWh 25kVA Air Cooling Commercial Energy Storage System for AC Distribution Integration
Voltertech 57.6kWh 25kVA commercial BESS with 230/400V AC interface, 36.2A rated current, 576V LiFePO4 battery and optional dual-channel PV input. For installers planning commercial electrical distribution and solar integration. -
57.6kWh 25kVA Hybrid Solar Energy System with LiFePO4 Battery for Commercial Solar Projects
57.6kWh 25kVA Hybrid Solar Energy System with LiFePO4 Battery The Voltertech BESS-57KWH-25KW-W is an integrated battery storage solution designed for hybrid solar energy systems. With 57.6kWh LiFePO4 battery capacity and 25kVA rated power, it can work with solar PV, utility power and supported loads ...