16kW Hybrid Solar Inverter with 3 MPPT and 21.8kW PV Input for Farm and Off-Grid Power
16kW Hybrid Solar Inverter for Farm and Off-Grid Power
Farms and rural facilities face a different energy problem from urban buildings. Grid connections may be weak, unstable or simply unavailable, while essential equipment — irrigation pumps, cold rooms, workshops and farm offices — still needs reliable power every day. A failed pump during a dry week or a warm cold room after harvest can cost far more than the power system itself.
The Voltertech INV-16KW-51.2V-W is a 16kW single-phase hybrid solar inverter developed for farm and off-grid power applications. It provides 16,000W rated AC output, supports up to 21.8kW of photovoltaic input through three MPPT trackers, and delivers up to 250A of battery charging current with a 100A AC passthrough rating.
Operating on a 48V-class battery platform, the inverter integrates with compatible LiFePO4 storage systems. Its IP65 enclosure, Wi-Fi monitoring and parallel capability of up to 6 units support installations ranging from single farm sites to larger rural energy projects.
Key Advantages for Farm and Rural Projects
Sizing Solar Power for Real Farm Loads
Farm electrical demand is usually dominated by motor-driven equipment. An irrigation pump may run for hours at a steady load, but its starting current can reach several times the running value. Cold rooms and refrigeration add compressor loads that cycle throughout the day and night.
The INV-16KW-51.2V-W provides 16kW rated output with a nominal output current of 69.6A. For farm projects, the key design step is listing every motor and compressor, confirming starting current or soft-start arrangements, and checking which loads must operate simultaneously. A system sized only from running watts is a common cause of tripping and early failures in agricultural installations.
Using Three MPPT Trackers Across Farm Buildings
Solar panels on a farm rarely sit on a single roof. The pump house may face one direction, the cold room another, and a ground-mounted array may occupy open land nearby. With a single-MPPT inverter, these arrays must be combined or redesigned around one orientation.
The three MPPT trackers on the INV-16KW-51.2V-W accept separate PV strings with different orientations or shading conditions, with input currents of 18A + 18A + 36A and an MPPT operating range of 50–450VDC. This gives installers practical freedom to use the roofs and land already available on the farm, rather than redesigning the site around the inverter.
Farm Operating Scenarios
Daytime Solar Irrigation and Farm Loads
Solar generation supplies pumps and daytime equipment directly while charging the battery, aligning irrigation schedules with peak sunlight hours.
Battery Backup for Cold Storage and Essential Loads
Stored energy keeps refrigeration, lighting and essential circuits running through the night or during grid outages.
Hybrid Solar, Grid and Generator Operation
Dual independent AC inputs allow grid and generator sources to be integrated with solar and battery storage, providing layered backup for remote sites.
Battery Selection for a 16kW Farm System
The inverter operates on a nominal 48VDC battery platform with up to 250A charging current. Compatible LiFePO4 battery systems should match the voltage range, charging limits and CAN or RS485 communication requirements of the inverter.
For farm projects, battery sizing depends on which loads must run after sunset. Cold storage and essential circuits typically justify storage first, while irrigation can often be scheduled into daylight hours to reduce battery demand. Many farm installations in this power class start from 30–40kWh of storage, with additional battery units added as the operation grows, within BMS and protection limits.
Core Technical Specifications
Swipe left or right to view the complete specification table.
| Parameter | Specification |
|---|---|
| Model | INV-16KW-51.2V-W |
| Inverter Type | Single-Phase Hybrid Solar Inverter |
| Rated AC Output Power | 16,000W |
| Nominal AC Output Voltage | 220 / 230 / 240VAC |
| Nominal AC Output Current | 69.6A |
| Output Waveform | Pure Sine Wave |
| Maximum PV Input Power | 21,800W |
| Maximum PV Input Voltage | 520VDC |
| MPPT Operating Voltage Range | 50–450VDC |
| Number of MPPT Trackers | 3 |
| PV Input Current | 18A + 18A + 36A |
| Nominal Battery Voltage | 48VDC |
| Maximum Charging Current (Solar / AC / Combined) | 250A |
| Maximum Charging Power | 14,000W (56V) |
| Maximum AC Input Current | 100A (Passthrough) |
| Maximum Conversion Efficiency (DC/AC) | 97% |
| Communication | RS485 / CAN / Wi-Fi / Dry Contact |
| Parallel Operation | Up to 6 Units (Single-Phase) / 3 Units (Three-Phase) |
| Protection Rating | IP65 |
| Operating Temperature | -10°C to +50°C |
| Product Dimensions (D × W × H) | 637.5 × 491 × 300.5mm |
| Net Weight | 50kg |
System Integration and Project Considerations
For installers and distributors serving agricultural customers, a dependable farm power system depends on matching the inverter, PV layout, battery bank and motor loads to the actual working routine of the farm.
Typical Farm and Off-Grid Applications
Irrigation and Water Pumping
Solar-powered pumping for irrigation, livestock watering and water transfer, with daytime scheduling to make direct use of solar generation. Pump starting requirements must be verified.
Cold Storage and Produce Handling
Backup for cold rooms, refrigeration and packing equipment where temperature interruptions directly cause product losses.
Farm Workshops and Offices
Power for tools, machinery, computers and lighting within the inverter's rating, integrated with the same solar and battery system serving the rest of the farm.
Rural Sites and Off-Grid Facilities
Complete solar-plus-storage systems for remote homes, estates, field stations and rural facilities where grid power is unavailable or unreliable.
Frequently Asked Questions
Q1. Can a 16kW inverter run an irrigation pump?
It can support pumps whose running and starting requirements fall within the inverter's capability. The critical check is starting current: direct-on-line motors may need several times their rated power at startup. Share the pump nameplate or starting method with your supplier before confirming the selection.
Q2. What is the advantage of three MPPT trackers on a farm?
Farm solar arrays are often spread across different roofs or ground locations with different orientations and shading. Three independent MPPT inputs allow these arrays to be used efficiently without forcing every panel into the same electrical configuration.
Q3. How much battery capacity does a farm system need?
It depends on which loads must operate after sunset. Farms that schedule irrigation into daylight hours mainly need storage for cold rooms and essential night loads. Projects in this power class commonly start from 30–40kWh and expand as needed.
Q4. Can this inverter work with a diesel generator?
The series provides two independent AC inputs, allowing grid and generator sources to be integrated with solar and battery storage. The exact wiring and control configuration should be confirmed during system design.
Q5. What is the difference between the 12kW and 16kW models?
The 16kW model offers higher AC output (16,000W vs 12,000W), three MPPT trackers instead of two, a larger PV input limit (21.8kW vs 16.2kW) and a 100A passthrough rating. It is typically selected for farms and larger sites with multiple buildings and motor-driven loads.
Q6. Can this inverter supply three-phase equipment?
A single unit is single-phase and cannot directly power three-phase loads. An approved three-unit three-phase configuration is available for suitable projects, subject to verification against current manufacturer documentation and site requirements.
Q7. What information is needed for a farm power quotation?
Please provide the destination country, equipment list with power ratings (especially pumps and compressors), planned PV array locations, intended battery capacity or backup hours, grid and generator availability, and required quantity. Site photos or a simple layout sketch also help with system design.
Planning a Solar Power System for a Farm Project?
Voltertech supplies hybrid solar inverters and compatible LiFePO4 battery systems for agricultural and off-grid projects. Share your equipment list, site layout and backup requirements for system matching and quotation.
OEM and ODM options are available for distributors and regional project partners.
Request 16kW Inverter Details & QuotationFarm and Off-Grid Power Hybrid Solar Inverter
,3 MPPT Hybrid Solar Inverter
,21.8kW PV Input Solar Inverter
-
233kWh Commercial Energy Storage System with Diesel Generator Linkage and 20ms STS Transfer for Remote Off-Grid Sites
233kWh off-grid battery storage for remote sites and diesel displacement. 100kW on/off-grid PCS, 156kW PV input, 20ms transfer, diesel generator linkage, liquid cooling, 3-unit parallel. For mines, camps, islands, telecom sites. OEM available. -
48kWh Stackable Floor Standing Lithium Battery with Up to 15 Units Parallel for Solar Energy Storage
Voltertech BAT-48KWH-51.2V-W offers 48.23kWh nominal storage in a floor-standing 51.2V 942Ah LiFePO4 battery, with IP54 protection and CAN/RS485 communication for compatible farm, workshop and distributed solar installations. -
32kWh IP54 Floor Standing Lithium Battery 628Ah LiFePO4 Energy Storage Battery for Solar
32kWh IP54 Floor Standing LiFePO4 Battery for Solar Installers The Voltertech BAT-32KWH-51.2V-W is a 32kWh floor standing LiFePO4 battery designed for solar installers, distributors and energy storage integrators. Built with a 51.2V 628Ah battery configuration, it combines an IP54-rated enclosure, ...