16kWh Thermostatic Control Indoor Tower Floor Standing Lithium Battery for Solar Storage

16kWh Indoor Tower LiFePO4 Battery for Solar Storage

The Voltertech BAT-16KWH-51.2V-H-W is a 51.2V 314Ah LiFePO4 battery delivering 16.07kWh of nominal energy. Designed for indoor solar energy storage installations, this tower-style battery combines a modular structure, flexible installation brackets and thermostatic control. It provides a practical storage option for solar installers working on residential, office and other protected indoor energy storage projects.

Tower Design for Indoor Battery Installation

With dimensions of 500 × 235 × 820mm, the battery is designed for floor-standing installation where space and equipment arrangement need to be considered. Its modular construction supports stackable installation with flexible brackets, allowing installers to plan the physical battery arrangement according to the project.

The enclosure has an IP20 protection rating, making a suitable indoor location important. The installation area should remain dry, protected from water exposure and within the specified operating temperature range. Appropriate handling and structural support are also required for the approximately 120kg battery.

Thermostatic Control and Battery Protection

The battery specification includes thermostatic control and temperature-related BMS protection. These features form part of the battery's operating and protection design.

The specified charging temperature range is 0°C to 45°C, while discharging is supported from -20°C to 55°C. Installers should assess the actual site conditions and follow the approved installation instructions. The presence of thermostatic control does not eliminate the need for suitable environmental protection.

Integration with Low-Voltage Solar Inverters

The 51.2V battery uses CAN and RS485 communication interfaces for integration with compatible hybrid and off-grid inverter systems. Remote monitoring and update functions are also listed in the product information.

Before commissioning, the installer should confirm inverter communication protocols, charging parameters and system configuration. For projects requiring additional battery capacity, up to 15 compatible units can be connected in parallel, subject to the approved system design.

Technical Specifications

Applications for Indoor Solar Energy Storage

This battery can be considered for household solar storage, office backup systems and protected agricultural power installations. The final battery configuration should be selected according to the required energy capacity, electrical loads, inverter compatibility and installation environment.

Frequently Asked Questions

1. Is this tower battery suitable for outdoor installation?

The enclosure is rated IP20. It should be installed in a protected indoor location that meets the specified environmental and operating requirements.

2. Does thermostatic control mean the battery has built-in heating or cooling?

The specification lists thermostatic control, but does not identify a particular heating or cooling mechanism. Please confirm the thermal management configuration before specifying it for a project.

3. Can these batteries be stacked together?

The product information describes stackable installation with flexible brackets. The approved stacking arrangement and structural support should be verified before installation.

4. Does CAN/RS485 communication guarantee inverter compatibility?

No. Communication compatibility depends on the inverter model, firmware and supported protocol. We recommend checking the exact inverter details before ordering.

5. What details are needed for a project quotation?

Please provide the inverter model, required battery quantity, installation environment and destination country. These details help us check the proposed configuration and prepare a quotation.