15.36kWh 3.6kW Off Grid Solar Battery System With Extended Energy Reserve
15.36kWh 3.6kW Off Grid Solar Battery System with Extended Energy Reserve
This off grid solar battery system combines a 15.36kWh LiFePO4 battery bank with a 3.6kW inverter and MPPT charging. It provides the largest energy reserve in the series for remote sites with moderate peak power and longer daily operating requirements.
Use the Battery as a Managed Reserve
The larger battery may support longer evening, overnight or low-solar operation, but every load should still be classified by importance. Essential equipment should receive priority over flexible or high-consumption devices.
The inverter supplies 3.6kW continuously. A large remaining battery reserve does not allow the system to exceed this output limit.
Provide Enough Energy for Daily Recovery
The solar input operates from 60–500Vdc with a 500Vdc maximum open-circuit voltage and an 18A current limit. The solar array should provide enough daily energy to support loads and restore the used battery capacity.
A compatible generator or utility source can provide recovery charging during poor weather. Available charging time becomes especially important when a large part of the battery is used each day.
Control Peak Loads and Output Circuits
The inverter provides 5400VA instantaneous power, but pumps, compressors and other motor loads should still be checked for startup demand.
Two AC channels can separate essential loads from flexible equipment. Total output remains 3.6kW, and the system does not support parallel operation or grid export.
15.36kWh Off-Grid System Specifications
| Off-Grid Stored Energy | 15.36kWh / 25.6V / 600Ah LiFePO4 |
| Continuous AC Supply | 3.6kW / 220 or 230Vac / 50 or 60Hz |
| Output Waveform and Peak | Pure Sine Wave / 5400VA Instantaneous |
| PV Charging Limits | 60–500Vdc MPPT / 500Vdc Maximum Voc / 18A |
| AC Recovery Charging | 230Vac / 170–280Vac or 90–280Vac / Auto Frequency |
| Maximum Battery Current | 100A Charge / 150A Discharge Continuous |
| Load Distribution | Two AC Output Channels / 3.6kW Combined |
| Monitoring Interfaces | LCD / RS232 / RS485 / CAN |
| Installation and System Limits | IP22 / Indoor Protected Area / No Parallel or Grid Export |
15.36kWh Off-Grid System FAQ
Can this system provide several days of energy?
That depends on daily consumption, solar production, battery reserve and generator availability.
Is it suitable for a remote clinic or farm office?
It may be suitable when the peak load remains within 3.6kW and daily energy use fits the charging plan.
Can the system operate a large water pump?
The pump’s running and startup power must be checked against the inverter limits.
Can a generator restore the battery during poor weather?
Yes, when the generator provides compatible voltage, frequency and sufficient continuous power.
What should be provided before quotation?
Provide daily energy consumption, peak and startup power, solar conditions, generator data and required reserve time.
Build a Practical Off-Grid Energy Plan
Send the site load profile and charging conditions. We will review whether the 15.36kWh configuration can provide the required reserve.
15.36kWh Off Grid Solar Battery System
,3.6kW Off Grid Solar Battery System
-
8kW Hybrid Solar Inverter with CT and Touchscreen Control for Installer-Focused Solar Projects
Voltertech 8kW 48V single-phase hybrid solar inverter with CT, touchscreen, Wi-Fi, dual MPPT and up to 13.5kW PV input. IP65 enclosure and CAN/RS485 support solar installers planning battery and AC system integration. -
8kW 48V Hybrid Solar Inverter with Dual MPPT for Residential Battery Backup Systems
8kW 48V Hybrid Solar Inverter for Home Battery Backup Systems 8kW 48V Hybrid Solar Inverter for Home Battery Backup Systems . Designed for residential solar and battery storage projects with higher power demand, this single-phase hybrid inverter provides 8000W rated AC output, supports up to 13500W ... -
10.24kWh 51.2V 200Ah Wall Mounted LiFePO4 Solar Storage Battery with Parallel Expansion for Residential Energy Storage
10.24kWh 51.2V 200Ah Wall Mounted LiFePO4 Solar Storage Battery . Designed for low-voltage residential energy storage, this 51.2V LiFePO4 battery provides 200Ah nominal capacity and 10.24kWh nominal energy in a single unit. RS485 and CAN communication are provided for inverter integration, while ...