51.2V 100Ah Wall Mounted Lithium Battery With CAN RS485 150A Pulse

51.2V 100Ah Wall Mounted Lithium Battery with CAN RS485 and 150A Pulse

Lithium Battery with Communication and BMS Protection

This 51.2V 100Ah wall mounted lithium battery is designed for compatible solar inverters, residential backup systems and low-voltage energy-storage installations that require documented current limits and optional battery communication.

Its electrical configuration provides 5.12kWh of nominal energy, 100A of continuous discharge current and a short pulse capability of 150A for one second. The pulse value provides temporary current headroom but must not be treated as the continuous operating rating.

Optional CAN and RS485 ports can support communication with compatible inverter systems. An optional LCD display can also provide local access to supported battery status information at the installation site.

BMS, Communication and Pulse-Current Features

CAN RS485 and Inverter Compatibility

The presence of CAN or RS485 ports does not guarantee communication with every inverter. Both products must use a compatible protocol, correct cable pin assignment and matching software configuration.

The source specification lists protocol families associated with Deye, Growatt, Voltronic, GoodWe, PYLO, Victron, SMA and Sofar. The exact inverter model, firmware version and cable definition should still be confirmed before ordering.

When communication compatibility is not confirmed, installers should not assume that automatic charging control, state-of-charge reporting, alarm information or battery-status data will be exchanged with the inverter.

Electrical compatibility remains necessary even when communication is available. The inverter must operate within the battery’s 40.0–58.4Vdc range, support the listed 56.0V floating-charge voltage and limit continuous charging current to 50A.

BMS and Communication Specifications

51.2V Battery Communication FAQ

Are CAN and RS485 included with every battery?

No. The specification identifies CAN and RS485 as optional communication configurations that should be confirmed before ordering.

Does the battery communicate with every inverter model?

No. Compatibility depends on the inverter model, firmware, communication protocol, cable pin definition and configuration settings.

What does the 150A discharge rating mean?

It is a one-second pulse rating. The documented maximum continuous discharge current is 100A.

Which BMS protection functions are listed?

The listed functions include overcharge, overdischarge, overcurrent, short-circuit and overtemperature protection.

Is the LCD display included as standard?

No. The LCD is identified as an optional configuration and should be included in the order requirements when needed.

Battery Communication and Integration Support

This wall mounted lithium battery is suitable for distributors and system integrators requiring a 51.2V battery with optional inverter communication, documented BMS protection and clear current limits.