48kWh IP54 Floor Standing Lithium Battery LiFePO4 Solar Energy Storage Battery for Farm and Office Energy Storage

48kWh LiFePO4 Battery for Farm and Office Energy Storage

The Voltertech BAT-48KWH-51.2V-W is a 48.23kWh LiFePO4 battery designed for agricultural solar installations, office energy storage and other high-capacity low-voltage battery projects. Built on a 51.2V 942Ah platform, it combines an IP54-rated enclosure, thermostatic control and CAN/RS485 communication for integration with compatible solar inverter systems.

For solar installers and system integrators, this battery offers a concentrated energy storage solution where the project requires substantial battery capacity within a single unit.

Solar Battery Storage for Agricultural Facilities

Remote farms and agricultural buildings may require stored solar energy outside daylight hours or during interruptions to their normal electricity supply. The 48.23kWh battery can form part of a solar storage system serving suitable agricultural electrical loads.

When designing a farm energy storage installation, equipment such as irrigation pumps, refrigeration units and other motor-driven loads must be assessed for both operating power and starting current. The inverter, battery discharge capability and electrical protection must be matched to the actual equipment requirements.

Energy Storage for Offices and Small Commercial Sites

Office facilities may use battery storage to support selected electrical circuits or manage energy generated by solar panels. A 48.23kWh battery provides a substantial nominal energy reserve for projects that require more capacity than smaller residential battery units.

Actual backup duration and available power depend on the connected inverter, operating settings and electrical loads. The battery should be integrated into a properly designed energy storage system rather than treated as a standalone backup power supply.

IP54 Protection and Installation Requirements

The battery features an IP54-rated enclosure, providing protection against limited dust ingress and splashing water. It is intended for suitable protected installation locations rather than unrestricted exposure to rain or outdoor weather.

Weighing approximately 335kg, the battery requires appropriate handling equipment and a stable supporting surface. Installers should confirm delivery access, cable routing, available clearance and environmental conditions before positioning the unit.

Battery Management and Inverter Communication

The LiFePO4 battery specification includes thermostatic control, intelligent monitoring and remote update support. CAN and RS485 communication interfaces allow integration with compatible hybrid and off-grid inverter systems.

Supported inverter brands and communication protocols should be verified for the exact inverter model and firmware. The modular architecture also supports up to 15 compatible units in parallel, subject to the approved system configuration.

Technical Specifications

Frequently Asked Questions

1. Can this battery support solar-powered agricultural equipment?

It can be integrated into a suitably designed farm solar storage system. The inverter and battery must be checked against equipment power requirements, including motor starting currents where applicable.

2. Is a 48kWh battery suitable for office backup power?

It can serve as the storage component of an office backup system. Actual supported loads and operating time depend on the inverter, electrical configuration and usable battery capacity.

3. Can the IP54 battery be installed in an outdoor farm area?

IP54 does not provide complete weather protection. A suitable sheltered installation location should be selected according to the environmental conditions and installation requirements.

4. Can this battery communicate with existing solar inverters?

The battery provides CAN and RS485 interfaces. Compatibility depends on the inverter model, firmware and supported BMS protocol. These details should be confirmed before ordering.

5. What information should I provide for a project quotation?

Please share the inverter model, required battery quantity, installation environment, main electrical loads and destination country. This information helps us review the proposed system and prepare an appropriate quotation.