3.68kW 48V Solar Hybrid Battery Inverter With 80A Charging WiFi

3.68kW Hybrid Solar Inverter for 48V Batteries with 80A Charging and WiFi

48V Battery Integration with Remote Energy Monitoring

This 3.68kW hybrid solar inverter is designed for compatible 48V lithium and lead-acid battery systems. It combines battery charging, solar conversion, grid-connected self-consumption and backup power management in one unit.

The battery connection operates across a 40–60Vdc range, with 48V listed as the recommended battery platform. Maximum charging and discharging currents are both rated at 80A.

RS485 and CAN interfaces are available for compatible battery-management communication. LCD, APP, WiFi and LAN access support local and remote viewing of system operating information.

Battery, BMS and Monitoring Functions

Battery Capacity and Communication Planning

The listed 80A maximum charging current should not automatically be applied to every battery. The configured current must remain within the battery manufacturer’s charge-rate limit, BMS rating, cable capacity and protection-device specification.

Battery energy capacity should be selected according to average load, usable depth of discharge and required backup time. A larger battery may extend operating duration but does not increase the inverter’s 3.68kW output limit.

The presence of RS485 and CAN ports does not guarantee compatibility with every lithium battery. The supported protocol, cable pin definition and software settings should be confirmed before ordering.

Battery and Monitoring Specifications

48V Battery Hybrid Inverter FAQ

Which batteries can be connected to this inverter?

Compatible lithium and lead-acid batteries operating within the 40–60Vdc range may be used after their voltage and current requirements are confirmed.

Can every 48V battery accept 80A charging?

No. The permitted charging current depends on battery capacity, chemistry, BMS limit, cable size and DC protection equipment.

Does an RS485 or CAN port guarantee BMS compatibility?

No. The inverter and battery must also use a compatible communication protocol and the correct cable pin configuration.

Can the inverter be monitored remotely?

Compatible WiFi or LAN communication can provide application-based monitoring after network access and the monitoring platform are configured.

Can the system be configured for self-consumption without export?

Compatible CT or smart-meter control can support a self-consumption configuration. Final settings must follow the system design and local connection requirements.

Battery Compatibility and Monitoring Support

This 3.68kW hybrid solar inverter is suitable for battery distributors, residential installers and system integrators requiring 48V battery compatibility, BMS communication and remote monitoring.