10.24kWh 51.2V Floor Standing LiFePO4 Battery with 200A Current Support

10.24kWh 51.2V Floor Standing LiFePO4 Battery with 200A Current Support

This floor standing LiFePO4 battery provides 10.24kWh of nominal energy on a 51.2V, 200Ah platform. It is suitable for residential solar storage, office backup, communication equipment and small commercial projects requiring more energy than a standard 5kWh battery.

The battery operates as the DC storage section of an energy system. A compatible external inverter or charger is required to manage solar input, AC charging and load output.

Practical Floor Battery for Daily Energy Storage

The 10.24kWh capacity can store available solar energy for later household or business use. It may also maintain a planned reserve for lighting, refrigeration, internet equipment, computers, security systems and other selected loads.

Battery capacity determines the stored-energy reserve, while the external inverter determines AC output power. Required capacity should therefore be calculated from daily energy consumption and backup duration rather than appliance power alone.

Current Capability and Inverter Matching

The rated charge and discharge current is 100A. The specification also lists 200A continuous current and 205A for 10 seconds. The inverter, cables and protection equipment must remain compatible with the actual project current.

RS485, RS232 and CAN interfaces support communication with compatible inverter equipment. The inverter model, battery voltage range and supported communication method should be confirmed before ordering.

Compact Floor-Mounted Installation

The cabinet measures 675 × 500 × 250mm and weighs approximately 85kg. Its floor-mounted format can be positioned near inverter equipment without requiring a heavily reinforced wall.

The side cable outlet should be considered when planning the equipment layout. The IP21 enclosure requires a dry indoor or protected technical location with suitable ventilation and service access.

Bluetooth is optional, while WiFi is listed for remote battery data. The required monitoring configuration should be confirmed during quotation.

10.24kWh Floor Battery Specifications

10.24kWh Floor Battery FAQ

Why choose a floor battery instead of a wall-mounted model?

Floor placement avoids transferring the full 85kg battery weight to a wall and may simplify installation in technical rooms.

Can this battery support a 10kW inverter?

Compatibility depends on the inverter’s battery-current demand, operating voltage and communication protocol, not only its AC power rating.

Is the side cable outlet suitable for every equipment layout?

The installation area should reserve side clearance for power cables, communication wiring and routine inspection.

Can wireless monitoring be added?

Bluetooth is listed as optional, while the required WiFi or remote-data arrangement should be confirmed before production.

Which project data helps confirm battery suitability?

Provide the inverter model, daily energy consumption, peak load, backup target, installation space and project quantity.

Review a 10.24kWh Floor Battery Project