15.36kWh 51.2V Vertical Wall Mounted Lithium Battery With Top Cable Outlet Design

15.36kWh 51.2V Wall Mounted Lithium Battery with Top Cable Outlet Design

This wall mounted lithium battery combines 15.36kWh of nominal storage with a vertical cabinet and top cable outlet. It is positioned for solar backup, communication systems, security equipment, offices, clinics and other projects requiring a substantial low-voltage battery reserve.

The battery requires a compatible external inverter or PCS. System output, solar charging and AC load management are determined by the separately selected power-conversion equipment.

Vertical Cabinet for Utility Wall Placement

The enclosure measures 865 × 430 × 250mm, providing a narrower cabinet width than the alternative 15.36kWh configuration. This format can support utility-wall layouts where vertical equipment space is available but horizontal wall width is more limited.

Its top cable outlet allows power cables to be routed toward an overhead cable tray, distribution area or adjacent system equipment when this arrangement suits the project layout.

The battery weighs approximately 123kg. The mounting structure, delivery route and final wall position should be reviewed before shipment.

Energy Reserve for Backup-Focused Projects

The 15.36kWh capacity can maintain stored energy for defined priority loads or retain solar production for later use. Project sizing should consider daily energy consumption, required backup duration and the available recharge period.

The rated battery power is 5.12kW, with higher current and power references also listed in the specification. These values describe the battery side and do not automatically determine the AC output of the complete system.

Parallel Battery Bank Planning

The specification recommends six batteries for a common parallel arrangement and supports a maximum of sixteen units. The final quantity should be selected according to storage demand, inverter compatibility and project electrical design.

Larger battery banks require suitable cables, busbars, protection devices and communication coordination. Mixing batteries with different specifications, ages or operating conditions should be avoided unless compatibility has been confirmed.

Selectable Communication and Remote Data

RS485, RS232 and CAN interfaces provide communication options for compatible inverter equipment. Bluetooth is listed as optional, while WiFi is available for remote battery data.

The required communication protocol and remote-data option should be confirmed according to the inverter model and project monitoring requirements.

15.36kWh Vertical Wall Battery Specifications

Project Battery Bank FAQ

When is a top cable outlet useful?

It can simplify layouts where battery cables need to enter an overhead cable tray or connect to equipment installed above the battery.

Why are six batteries recommended when sixteen are supported?

Six units are listed as the recommended arrangement, while larger quantities require more detailed inverter, cable, protection and communication planning.

Can this battery be mixed with other 51.2V batteries?

Matching voltage alone is insufficient. Battery specification, BMS settings, condition and communication compatibility must also be reviewed.

Does the 10.24kW battery reference equal system AC output?

No. The external inverter determines the AC output available to connected equipment.

What site information helps prepare the battery-bank proposal?

Provide the inverter model, daily energy use, peak load, required reserve period, cable route, installation space and planned battery quantity.

Prepare a Multi-Battery Project Configuration