3.84kWh 3.6kW All In One Energy Storage System With Stackable LiFePO4 Battery

3.84kWh 3.6kW All in One Energy Storage System with Stackable LiFePO4 Battery

This compact all in one energy storage system combines a 3.84kWh LiFePO4 battery, 3.6kW pure sine wave inverter, MPPT solar charging and local monitoring in one floor-standing structure. It provides a practical starting point for projects that need an integrated battery and inverter without a large equipment footprint.

The single-battery configuration is suitable for lighting, routers, computers, televisions, refrigeration and other selected loads. Battery capacity determines operating time, while the 3.6kW inverter rating determines how much compatible equipment can run simultaneously.

Compact Integrated Energy Storage

The inverter and battery use the same 450 × 420mm footprint, creating an organized vertical system. This reduces the need to position separate battery and inverter enclosures in a small home, office, shop or technical room.

Two AC output channels allow priority and flexible equipment to be separated. The total output remains 3.6kW, so the connected loads on both channels must be calculated together.

Solar and AC Charging Flexibility

The MPPT input operates from 60–500Vdc, with a maximum photovoltaic open-circuit voltage of 500Vdc and an input-current limit of 18A. The solar-string voltage must remain within these limits under local temperature conditions.

AC charging is also available from a compatible utility or generator source. Photovoltaic or mains power can activate the lithium battery when required.

Load and Installation Considerations

The inverter provides 3.6kW rated output and 5400VA instantaneous power. Refrigerators, pumps and motor-driven equipment should be checked for both normal operating power and startup demand.

The IP22 enclosure is intended for a dry indoor or protected location. Parallel operation and grid-connected export are not supported, so the required power and battery capacity should be confirmed before ordering.

3.84kWh Integrated System Specifications

3.84kWh All in One ESS FAQ

Are the battery and inverter included together?

Yes. The battery, inverter, solar charging and local display are combined in one system.

Can both AC outputs provide 3.6kW at the same time?

No. The two channels share a total system-output limit of 3.6kW.

Can it operate a refrigerator or water pump?

Possibly, but running power and startup demand must be checked before selection.

Can additional systems be connected in parallel?

No. Parallel-machine operation is not supported by this configuration.

What should be provided for a quotation?

Provide the load list, startup power, required backup time, solar-panel data and local AC standard.

Choose the Right Battery Capacity