15.36kWh 51.2V 300Ah Floor Standing LiFePO4 Battery with Near Wall Design

15.36kWh 51.2V 300Ah Floor Standing LiFePO4 Battery with Near-Wall Design

This floor standing LiFePO4 battery stores 15.36kWh of nominal energy in a 51.2V 300Ah tower enclosure. Its near-wall floor layout is intended for projects that need higher capacity per battery unit while retaining clear access to the inverter, protection equipment and DC cabling.

One Larger Battery or Several Smaller Units?

Using one 15.36kWh tower can reduce the number of individual battery enclosures required to reach a similar storage target. It may also reduce the number of external battery-to-battery connections within the installation.

The trade-off is concentrated weight. The battery weighs 118kg net, so handling, floor loading and delivery access require more preparation than a smaller individual module.

Delivery Route Is Part of Product Selection

The packaged unit measures 1005 × 550 × 350mm and weighs 134kg gross. Before shipment, the buyer should check unloading equipment, doorway width, lift capacity and the internal path to the final equipment area.

The battery should be moved using equipment and procedures suitable for its weight. Manual handling alone should not be assumed to be sufficient.

Once positioned, the battery should have practical access to the M8 terminals, external DC protection and inverter cable route.

Current Capability of the 300Ah Configuration

The battery supports up to 200A of continuous charging and 200A of continuous discharge. The same numerical rating on both sides does not mean every project must operate at 200A.

Actual current should be set according to the charger, inverter, conductor size, cable length, external protection and preferred operating strategy.

The listed 300A pulse-discharge capability applies for one second. It is a temporary boundary and must not be treated as the continuous operating rating.

Storage Before Installation

The documented storage-temperature range is 0°C to 30°C, with a listed storage duration of six months at 25°C. Storage conditions should remain dry and controlled before installation.

High-Capacity Tower Specifications

15.36kWh Tower Battery FAQ

Is 15.36kWh contained in one battery enclosure?

Yes. The listed electrical configuration is 51.2V and 300Ah within one floor standing enclosure.

Can the battery be placed directly against a wall?

Required cable, ventilation and maintenance clearance should be maintained according to the final installation plan.

What lifting preparation is required?

The product weighs 118kg net and 134kg packaged. Suitable lifting or handling equipment should be prepared.

Can the battery be stored outside before installation?

The battery should be stored in a dry and controlled location within the documented storage-temperature range.

What should be confirmed before shipping?

Confirm the delivery route, unloading method, final floor position, inverter specification and cable-access requirements.

Delivery and Floor Layout Assessment