2.56kWh 25.6V Wall Mounted LiFePO4 Battery With 100A Continuous Output

2.56kWh 25.6V Wall Mounted LiFePO4 Battery with 100A Continuous Output

Compact Wall-Mounted Battery for 25.6V Energy Storage Systems

This 2.56kWh wall mounted LiFePO4 battery combines a nominal voltage of 25.6V with a rated capacity of 100Ah. Its compact enclosure is designed for dry indoor solar storage, backup power and compatible low-voltage inverter systems where floor space is limited.

The battery supports up to 100A of continuous discharge current, allowing it to supply compatible residential and light-commercial loads when the inverter, DC cabling and protection equipment are correctly selected. Its maximum continuous charging current is rated at 50A.

A wall-mounted structure helps installers keep the battery away from occupied floor areas while maintaining access for inspection and wiring. The product dimensions are 460 × 360 × 139mm, with a listed net weight of 23.2kg.

Core Benefits for Residential Solar Installations

Inverter Matching and Installation Planning

The connected inverter must support a 25.6V nominal battery platform and operate within the listed battery voltage range of 20.0–29.2Vdc. A nominal voltage label alone is not sufficient; charging voltage, low-voltage protection and current settings must also be compatible.

The battery’s 100A continuous discharge rating should be compared with the inverter’s maximum DC input demand. The installer must also consider cable length, conductor size, terminal rating, fuse or breaker capacity and expected ambient temperature.

Charging current should not exceed the listed 50A continuous limit. The final inverter charging setting should also reflect the battery configuration, operating temperature and any applicable communication or BMS requirements.

Battery and Installation Specifications

2.56kWh Wall Mounted Battery FAQ

Is this a 3kWh or 2.56kWh battery?

The formal specification lists 25.6V and 100Ah, which equals 2560Wh or 2.56kWh of nominal energy.

Can it continuously discharge at 150A?

No. Continuous discharge is rated at 100A. The 150A value applies only to a one-second pulse condition.

Can the battery be installed outdoors?

No outdoor claim should be made. Its IP20 rating requires installation in a dry and protected indoor location.

Can it work with any 24V solar inverter?

Compatibility depends on the inverter’s battery-voltage range, charging settings, current requirements and supported battery configuration.

What wall is required for installation?

The mounting surface must safely support the battery weight and mounting hardware while providing adequate access and ventilation clearance.

Wall-Mounted Battery Project Support

This battery is suitable for distributors, installers and system integrators looking for a compact 25.6V LiFePO4 storage option for compatible indoor solar and backup systems.