3.6kW 24V Solar Single Phase Inverter With 5kW MPPT 5.7kVA Surge

Single - Phase 3.6kW 24V Solar Inverter with 5kW MPPT and 5.7kVA Surge

High - PV-Input Inverter for Residential and Small Business Loads

This single-phase 3.6kW 24V solar inverter combines pure sine wave AC output, a wide-range MPPT solar charger, utility input and battery charging in one compact power-conversion platform.

The inverter provides 3.6kW of continuous output and 5.7kVA of short-duration surge capacity. It can support compatible lighting, refrigeration, computers, communication equipment, televisions, fans and selected pumps or air conditioners after their running and startup requirements have been checked.

Its built-in MPPT charger supports up to 5kW of photovoltaic input, allowing the solar array to be sized above the continuous AC output when daytime loads and battery charging are considered together.

Solar Power and Load Management

PV String and Appliance Sizing

Photovoltaic string voltage must remain within the 40–450Vdc MPPT operating range, while total open-circuit voltage must stay below the 500Vdc maximum. Cold-weather open-circuit voltage should be calculated before installation.

The combined continuous AC load should remain within 3.6kW. Refrigerators, pumps, compressors and air conditioners require an additional startup assessment because their initial demand may be higher than their normal running power.

Battery capacity determines operating duration and must be selected separately from inverter output. A higher-capacity battery can extend runtime, but it does not increase the inverter’s 3.6kW continuous output limit.

Electrical and Installation Specifications

3.6kW Solar Inverter FAQ

Can the inverter continuously supply 5.7kW?

No. Continuous output is 3.6kW. The 5.7kVA specification represents short-duration surge capacity for compatible starting loads.

Can a 5kW solar array be connected to a 3.6kW inverter?

The solar charger is rated for up to 5kW of photovoltaic input, subject to the 18A current limit and specified voltage limits.

Can it support a pump or air conditioner?

Compatible equipment may be supported when its running power, startup demand and combined system load remain within the inverter limits.

Does the inverter support generator input?

Generator operation is supported when the generator provides compatible voltage, frequency and sufficient capacity for active loads and charging.

Where should the inverter be installed?

The IP21 unit should be installed in a dry, protected and ventilated technical area with sufficient cable and maintenance clearance.

Solar Inverter Project Support

This solar inverter is suitable for distributors, installers and system integrators serving residential solar, small business backup and generator-assisted power projects.