15kWh 51.2V Floor Standing LiFePO4 Battery with CAN RS485 Communication

15kWh 51.2V Floor Standing LiFePO4 Battery with CAN RS485 Communication

This 15kWh 51.2V floor standing LiFePO4 battery is designed for residential solar storage, offices, shops and small business backup projects. Its integrated cabinet provides a practical capacity step above common wall-mounted batteries while remaining suitable for low-voltage inverter systems.

The battery operates as the DC energy-storage section of the system. A compatible external inverter is required to manage solar charging, utility input and AC load output.

A Practical Capacity for Everyday Energy Storage

The stated 15,000Wh capacity can be used to store daytime solar energy for evening consumption or maintain a planned reserve for selected loads. Typical projects may include lighting, refrigeration, communications, computers and other equipment selected according to their daily energy use.

Battery capacity and inverter output should not be treated as the same specification. The battery determines the amount of stored energy, while the inverter determines the available AC power and the number of loads that can operate simultaneously.

Match the Battery with the Correct Inverter

The selected inverter should support a 51.2V lithium battery platform together with the battery’s charging and discharging voltage references. Its charging current and discharge demand must also remain within the battery limits.

CAN, RS485 and RS232 interfaces provide communication options for compatible inverter and monitoring equipment. The inverter model and supported battery communication method should be confirmed before ordering.

The specification lists a rated battery output power of 10kW. Actual AC system output still depends on the external inverter, battery settings, cable design and connected load profile.

Floor-Standing Installation for Protected Indoor Areas

The battery has a net weight of approximately 129kg. The delivery route, floor condition and final equipment position should be checked before shipment.

Its IP22 enclosure requires a dry indoor or protected technical location. Adequate ventilation and access should be provided for battery cables, communication wiring and routine inspection.

15kWh Floor Standing Battery Specifications

15kWh Battery Project FAQ

What type of inverter should be selected for this battery?

The inverter should support a 51.2V lithium battery, compatible voltage settings, suitable current limits and an available CAN or RS485 protocol.

Does the 10kW battery output determine backup duration?

No. Backup duration is mainly determined by the connected load, daily energy use, conversion losses and retained battery reserve.

Can the battery store surplus daytime solar energy?

Yes, when it is connected to a compatible solar inverter and the PV charging system is correctly configured.

Why must the battery be installed in a protected area?

The IP22 enclosure is not intended for exposed outdoor use and should remain protected from rain, water and condensation.

How can buyers receive a more accurate recommendation?

Provide the inverter model, daily consumption, peak load, backup target, charging source and expected order quantity.

Review Your 15kWh Battery Project