5.12kWh 51.2V Wall Mounted LiFePO4 Battery With Bluetooth And CAN RS485

5.12kWh 51.2V Wall Mounted LiFePO4 Battery with Bluetooth and CAN RS485

This wall mounted LiFePO4 battery provides 5120Wh of stated energy storage in a compact white enclosure. It is suitable for residential solar projects, apartments, offices and small backup systems where floor space needs to remain available.

The battery works as the DC storage section of an energy system and requires a compatible external inverter. Smart BMS functions, Bluetooth support, LED indication and multiple communication interfaces help installers integrate the battery into supported low-voltage solar systems.

Compact Storage without Occupying Floor Space

The wall-mounted format is useful for homes and small technical areas where a floor-standing cabinet would occupy valuable space. Its 601.5 × 400 × 155mm enclosure can be positioned near compatible inverter equipment while maintaining an organized installation layout.

Before installation, the supporting wall, mounting hardware, cable route and service clearance should be reviewed. The battery weighs approximately 45.5kg and requires secure mechanical support.

Designed for Essential Residential Loads

The 5.12kWh battery can store available solar energy for evening consumption or maintain a reserve for selected loads such as lighting, routers, computers, televisions and compatible refrigeration equipment.

Actual operating time depends on the connected load, inverter efficiency, battery settings and retained reserve. Battery energy should therefore be selected from daily watt-hour consumption rather than appliance power alone.

Communication and Capacity Expansion

CAN, RS485 and RS232 interfaces provide communication options for compatible inverter and monitoring equipment. The inverter model and supported battery protocol should be confirmed before ordering.

The specification supports up to six battery units in parallel when additional storage capacity is required. The inverter, battery quantity, communication arrangement and cable configuration should be reviewed as one complete system.

The IP21 enclosure is intended for a dry indoor or protected technical area. It should not be installed where it may be exposed to rain, water or condensation.

5.12kWh Wall Mounted Battery Specifications

Wall Mounted Battery FAQ

What should be checked before mounting the battery?

Confirm the wall structure, mounting method, equipment weight, cable route and maintenance clearance.

What information can Bluetooth support provide?

The product sheet states Bluetooth support through the Smart BMS. Available information depends on the supplied monitoring configuration.

Can one battery operate a complete home?

Suitability depends on the selected appliances, daily energy use, inverter power and required backup period.

Can storage capacity be increased later?

The specification supports up to six batteries in parallel, subject to inverter and system compatibility.

Which project details help prepare a quotation?

Provide the inverter model, daily load profile, required backup time, installation layout and expected quantity.

Review Your Wall-Mounted Battery Project