Baterai LiFePO4 Berdiri Lantai 10,24kWh 25,6V 400Ah untuk Cadangan Surya
10.24kWh 25.6V 400Ah Floor Standing LiFePO4 Battery for Solar Backup
Kapasitas Baterai yang Lebih Tinggi pada Platform 25.6V
Ini 10.24kWh floor standing LiFePO4 battery combines a 25.6V nominal voltage with a 400Ah rated capacity. It is intended for compatible residential solar,off-grid and backup power systems that need more stored energy while continuing to use a low-voltage battery platform (sistem listrik off-grid dan cadangan yang membutuhkan lebih banyak energi yang tersimpan sambil terus menggunakan platform baterai tegangan rendah).
The 10240Wh nominal capacity provides twice the stored energy of a 5.12kWh battery. This makes the unit relevant for projects where selected household circuits, refrigeration, communication equipment.,Pencahayaan atau beban prioritas lainnya membutuhkan periode cadangan yang lebih lama.
Pondok yang berdiri di lantai memiliki ukuran 800 × 660 × 139 mm dan memiliki berat bersih terdaftar 88 kg.The slim depth allows the battery to be positioned against a suitable indoor wall while its weight remains supported by the floor rather than relying entirely on wall-mounted hardware..
Where This 10.24kWh Battery Fits
Extended Residential Backup
Kapasitas penyimpanan yang lebih besar dapat mendukung target cadangan yang lebih lama daripada baterai yang lebih kecil ketika kedua sistem beroperasi dengan setelan beban dan pembuangan yang sebanding.
Daytime Solar Energy Storage
Sistem surya yang kompatibel dapat menyimpan energi fotovoltaik yang tersedia untuk penggunaan rumah tangga selanjutnya sesuai dengan konfigurasi pengisian dan operasi inverter.
Low-Voltage Off-Grid Systems
The 25.6V battery platform can be considered for compatible off-grid inverters after voltage range, charging current and DC current demand are verified.
Calculate Storage from Loads and Operating Hours (Harga penyimpanan dari beban dan jam operasi)
Battery capacity should be selected from the actual load schedule rather than the inverter power label alone. Each priority appliance should be listed with its normal operating power,perilaku startup dan expected hours of use.
The full 10.24kWh nameplate value should not be treated as guaranteed AC output energy. Energi yang dapat digunakan dipengaruhi oleh the configured discharge limit, inverter conversion efficiency,suhu baterai, kabel losses and system protection settings.
Misalnya, sistem yang dirancang di sekitar pencahayaan, router dan pendingin akan memiliki durasi cadangan yang berbeda dari yang juga mencakup pompa, peralatan pemanas atau beban motor besar.The installer should calculate the average demand rather than relying only on the highest appliance rating (penyewa harus menghitung permintaan rata-rata daripada hanya mengandalkan peringkat peralatan tertinggi).
Inverter dan DC Current Matching
The connected inverter must support a nominal 25.6V battery and remain within the battery's 20.0?? 29.2Vdc operating range. Its charging profile should also support the listed 28.0V tegangan muatan terapung.
The maximum continuous charging current is 200A. This is the battery limit rather than a required charging setting. The final value should remain within the inverter charger rating, cable capacity,DC protection rating and project charging requirements (Rating perlindungan DC dan persyaratan pengisian proyek).
Continuous discharge is also rated at 200A. The inverter's maximum battery-side current must be checked against this value. Cable length, conductor cross-section, M8 terminal connection,Fuse or breaker capacity and ambient temperature should be included in the design. kapasitas sekering atau pemutus dan suhu sekitar harus dimasukkan dalam desain.
The IP20 enclosure is intended for a dry indoor technical location. It should be protected from rain, condensation, direct sunlight, excessive dust and nearby heat sources.
Floor Standing Battery Spesifikasi
| Kimia Baterai | Lithium Iron Phosphate / LiFePO4 |
| Nominal Electrical Rating | 25.6Vdc / 400Ah / 10240Wh |
| Jangkauan Tegangan Baterai | 20.0·29.2Vdc |
| Tegangan muatan terapung | 28.0Vdc |
| Batas Pengisian Berkelanjutan | 200A Maksimal |
| Batas pelepasan terus menerus | 200A Maksimal |
| Short Pulse Discharge | 300A untuk 1 detik |
| Ukuran dan Berat Produk | 800 × 660 × 139mm / 88kg Net |
| Kondisi Operasi Dalam Ruang | IP20 / -10°C sampai 50°C / 0 ∼95% Tidak Kondensasi |
10.24kWh Solar Backup Battery FAQ
Apakah ini baterai 10kWh atau 10.24kWh?
Rating listrik formalnya adalah 25.6V dan 400Ah, yang sama dengan 10240Wh atau 10.24kWh energi nominal.
Can it be used with a 24V-class solar inverter?
Hal ini dapat digunakan dengan inverter yang kompatibel setelah tegangan operasi, tegangan pengisian dan persyaratan maksimum baterai-sekarang dikonfirmasi.
Does the 10.24kWh rating indicate output power?
Tidak. Ini menunjukkan energi yang tersimpan. Daya output AC ditentukan oleh inverter yang terhubung dan arus sisi baterai yang kompatibel.
Can the battery continuously discharge at 300A? Apakah baterai dapat terus-menerus terlarut pada 300A?
No. Rating pelepasan terus-menerusnya adalah 200A. Nilai 300A hanya berlaku untuk kondisi denyut nadi satu detik.
Apakah unit dapat dipasang di luar?
No outdoor claim should be made. Its IP20 enclosure requires a protected and dry indoor installation location.
Solar Backup Capacity Review
Untuk rekomendasi baterai yang akurat, installer harus menyediakan daftar priority-load, required operating hours, inverter rating, charging source and available equipment-room space.
Butuh untuk menentukan apakah 10.24kWh is suitable for the planned backup loads?
Request a Solar Backup Capacity Review (Mohon Tinjauan Kapasitas Cadangan Surya)
Baterai LiFePO4 Berdiri Lantai 10
,24kWh
,Baterai LiFePO4 Berdiri Lantai 25
-
15.36kWh 12kW All In One Energy Storage System Dual MPPT Storage Baterai yang dapat ditumpuk
15.36kWh 12kW All in One Energy Storage System with Dual MPPT Input This all in one energy storage system combines a 15.36kWh LiFePO4 battery, 12kW pure sine wave inverter, dual MPPT solar charging and local monitoring in one floor-standing structure. It offers a practical starting configuration for ... -
51.2V 314Ah Baterai penyimpanan energi rumah dengan komunikasi CAN RS485 opsional
51.2V 314Ah Home Energy Storage Battery with Optional CAN RS485 Communication This home energy storage battery provides 16076Wh of listed nominal LiFePO4 energy from a 51.2V 314Ah configuration. It is intended for compatible residential solar, backup and off-grid systems that require approximately ... -
Sistem Penyimpanan Energi Perumahan Fase Terpisah 10kW 30kWh Untuk Cadangan Generator
10kW 30kWh Split Phase Residential Energy Storage System for Generator Backup Split Phase Home Battery for Longer Power Outages This split phase residential energy storage system combines a 10kW pure sine wave inverter, 30.72kWh battery reserve, dual MPPT solar charging, generator support and ...