215kWh Liquid Cooled Commercial Battery Storage System for Business Backup Power and Commercial Energy Storage System Projects
215kWh Liquid Cooled Battery Storage for Business Backup Power
When the grid fails, a business starts losing money immediately. A factory line stops mid-shift, a cold room warms up, a clinic cannot run its equipment. In markets where outages are part of daily operations, backup power is no longer optional infrastructure.
The Voltertech BESS-215KWH-105KW-W is a commercial battery energy storage system designed for business backup and power continuity. It combines 215kWh of LiFePO4 storage with a 100kW-class PCS in a single liquid-cooled cabinet, sized for factories, cold storage facilities, commercial buildings and other sites that need dependable power through grid interruptions.
With 8000 charge cycles, a 15-year design life and an operating range of -20°C to +60°C, the system is built for continuous daily use in demanding climates.
Key Advantages for Backup Power Projects
How Long Can 215kWh Keep a Business Running?
The answer depends on what the system is carrying — and it is worth explaining to any customer asking the same question.
Backup duration equals usable battery energy divided by the actual load. At full 100kW output, 215kWh provides roughly two hours of runtime. But most commercial backup projects do not run everything at full power. A facility that keeps only essential circuits alive — say a 30kW load of refrigeration, lighting and control systems — can draw on the same cabinet for around six hours or more, with actual figures depending on system losses and operating conditions.
Why Liquid Cooling Matters for Commercial Backup
Battery temperature directly affects backup performance and service life. In hot climates, air-cooled cabinets can struggle to hold cell temperature within a narrow band, and repeated high-temperature operation accelerates capacity loss.
The liquid cooling loop in this system manages cell temperature more precisely than forced air, which supports consistent output during long discharge periods and helps protect cycle life under heavy daily cycling — the operating pattern typical of backup systems in weak-grid markets.
Operating Scenarios
Grid Outage Backup
The system discharges automatically during grid failures, keeping essential operations running until power returns.
Solar Plus Storage
Combined with on-site solar, stored energy extends into evening hours and outage periods, reducing diesel generator runtime where generators are also used.
Backup With Energy Cost Management
The same cabinet can support peak shaving and tariff optimization during normal operation, improving project economics between outages.
Planning a Commercial Backup Installation
A backup project succeeds or fails during the planning stage. Four checks matter most before ordering.
Core Technical Specifications
Swipe left or right to view the complete specification table.
| Parameter | Specification |
|---|---|
| Model | BESS-215KWH-105KW-W |
| System Type | Liquid-Cooled Commercial Battery Energy Storage System |
| Battery Chemistry | LiFePO4 |
| Total Capacity | 215kWh |
| Nominal Capacity (Cell) | 280Ah |
| Nominal Voltage | 768V |
| Operating Voltage Range | 648V – 864V |
| Nominal Charge / Discharge Current | 140A |
| PCS Rated Output Power | 100kW |
| PCS Rated Operating Voltage | AC 230/400V, 50/60Hz |
| Max. AC Current | 167A |
| Cooling Mode | Liquid Cooling |
| Cycle Life | 8000 Cycles |
| Calendar Life | 15 Years |
| Operating Temperature | -20°C to +60°C |
| Enclosure Protection | IP54 |
| Communication | LAN / RS485 / CAN |
| Dimensions (L × W × H) | 1400 × 1385 × 2203mm |
| Net Weight | Approx. 2.5 T |
Typical Applications
Factories and Workshops
Backup for production lines, compressors and control systems, sized to bridge outage periods without a full production stop.
Cold Storage and Food Processing
Continuity for refrigeration where every hour of lost power risks product write-offs that far exceed the cost of storage.
Clinics and Essential Services
Dependable power for medical and communication equipment in facilities where outages directly affect service quality.
Commercial Buildings and Warehouses
Backup for lighting, security, IT and partial HVAC loads, with tariff optimization available during normal grid operation.
Frequently Asked Questions
Q1. How long will a 215kWh battery storage system last during an outage?
At full 100kW output, approximately two hours. With a reduced essential-load setup of around 30kW, six hours or more is achievable. Actual runtime depends on the connected load and operating conditions.
Q2. What is the difference between the 105kW model name and the 100kW PCS rating?
The system is classified as a 105kW-class product, while the PCS rated output power is specified at 100kW. System design and load matching should be based on the rated 100kW AC output figure.
Q3. Is this system suitable for hot climates?
Yes. The cabinet is specified for operation from -20°C to +60°C and uses liquid cooling to maintain stable cell temperatures, which suits regions with high ambient temperatures.
Q4. Can the system work off-grid, or only with a grid connection?
The system is designed around grid-interactive operation at AC 230/400V. Its role in off-grid-style setups depends on the complete system design, including generation sources and control configuration, which should be reviewed per project.
Q5. Can several cabinets be combined for a larger project?
Yes. Multiple cabinets can be deployed in parallel for higher power or longer duration, coordinated through the LAN, RS485 and CAN communication interfaces.
Q6. How should the installation site be prepared?
Allow for the 2.5-tonne cabinet weight, approximately 1.4 × 1.4 metres of floor space plus service clearance, protection from standing water and direct weather beyond the IP54 rating, and access for liquid-cooling inspection and maintenance.
Q7. What information is needed for a project quotation?
Please provide the destination country, site voltage, the essential load list in kW, required backup hours, available solar generation if any, and the number of cabinets required. Site layout information helps with installation planning.
Planning a Commercial Backup Power Project?
Voltertech supplies liquid-cooled commercial battery storage systems for distributors, EPC contractors and project developers serving outage-prone markets. Share your load list and backup requirements for system configuration and quotation.
OEM options are available for regional partners and bulk projects.
Request 215kWh BESS Details & Quotation215kWh Commercial Battery Storage System
,Liquid Cooled Commercial Energy Storage System
,Business Backup Power Commercial BESS
-
16kWh 51.2V 314Ah Floor Standing Lithium Battery for Solar Inverter Retrofit Projects
16kWh 51.2V 314Ah LiFePO4 battery for solar system upgrades. Explore CAN/RS485 inverter compatibility, indoor installation and battery retrofit planning. -
32kWh IP54 Floor Standing Lithium Battery 628Ah LiFePO4 Energy Storage Battery for Solar
32kWh IP54 Floor Standing LiFePO4 Battery for Solar Installers The Voltertech BAT-32KWH-51.2V-W is a 32kWh floor standing LiFePO4 battery designed for solar installers, distributors and energy storage integrators. Built with a 51.2V 628Ah battery configuration, it combines an IP54-rated enclosure, ... -
3.44MWh Liquid Cooling Containerized Battery Energy Storage System for Utility Projects
3.44MWh Liquid Cooling Containerized Battery Energy Storage System The Voltertech BESS-3.44MWH-W liquid cooling containerized battery energy storage system is designed for utility-scale and large commercial energy projects, providing high-capacity battery storage, advanced thermal management and ...