16.08kWh 51.2V 314Ah Smart LiFePO4 Home Energy Storage Battery with Touchscreen and Mobile App Monitoring

16.08kWh 51.2V 314Ah Smart LiFePO4 Home Energy Storage Battery.

Built around a 51.2V 314Ah LiFePO4 battery platform, this low-voltage energy storage battery provides 16.08kWh nominal energy together with touchscreen control, wireless monitoring and inverter communication. Its smart interface and expandable architecture make system status and future capacity expansion easier to manage.

Battery Information Without Opening a Laptop

A 3.5-inch touchscreen is integrated directly into the battery. The product specification also provides Bluetooth for APP access and Wi-Fi for internet connectivity, giving users additional ways to view and manage battery information.

16.08kWh Capacity with 314Ah LiFePO4 Cells

The battery is rated at 51.2V nominal voltage and 314Ah nominal capacity, providing 16076.8Wh of nominal energy. LiFePO4 chemistry is used, while the specified cycle life is 6000 cycles at 25°C and 100% depth of discharge.

Expand from One Battery to a Larger Storage System

The system supports up to 15 battery units in parallel. This allows a project to start with a single 16.08kWh unit and increase nominal energy capacity when additional storage is required.

Designed for Easier Installation and Movement

The enclosure uses an automotive-grade steel band strapping design, while industrial lifting casters are provided to make positioning and movement easier during installation. The enclosure protection rating is IP65.

The product specification identifies home energy storage, commercial backup power and renewable energy integration as application scenarios.

Core Technical Specifications

Swipe left or right to view the complete specification table.

Inverter Communication and Protocol Matching

CAN, RS485 and RS232 communication interfaces are specified for system integration. The parameter sheet also lists compatibility with multiple inverter brands and provides direct inverter protocol selection.

Because communication requirements can differ between inverter models and firmware versions, the exact inverter brand and model should be confirmed before ordering.

Operating Environment and Certification

The specified discharge temperature range is -30°C to +60°C, while charging is specified from 0°C to +60°C. The enclosure protection rating is IP65.

The technical documentation lists UN38.3 and IEC62619 certifications.

Frequently Asked Questions