Français
Deutsch
Italiano
Русский
Español
Português
Nederlandse
Ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
Indonesia
Tiếng Việt
ไทย
বাংলা
فارسی
Polski
25.6V 100Ah IP65 Deep Cycle LiFePO4 Lithium Battery 100A Discharge For Power Storage
25.6V 100Ah IP65 Lithium Battery with 100A Discharge for Power Storage
A Current-Limited Battery for Defined 25.6V Applications
This 25.6V 100Ah IP65 lithium battery provides 2.56kWh of nominal LiFePO4 energy. It is intended for storage applications where the charger, inverter and connected DC loads can operate within a 50A charging limit and 100A continuous discharge limit.
Start with the Maximum Continuous Load
The continuous output limit is 100A. The connected inverter or DC load should be checked at the lowest expected battery voltage and highest planned operating power.
The 150A specification applies for one second only. It should not be treated as the normal output or used as the primary cable-sizing value.
Continuous Operation
Plan cables, protection and terminal connections around the expected continuous current.
Brief Load Events
Check startup-current duration against both the inverter capability and the one-second battery pulse limit.
Charging Equipment Requirements
The battery supports up to 50A of continuous charging and uses a listed 28.0V floating-charge setting. The charger should use a compatible lithium profile.
A lower charging current may be selected according to the available solar input, charger output and desired charging time. The maximum value does not need to be used in every installation.
Connection and Protection
The battery uses M8 terminals. Suitable lugs, cable cross-sections and torque procedures should be used to create a stable low-resistance connection.
The BMS provides overcharge, overdischarge, overcurrent, short-circuit and overtemperature protection. External fuses or breakers are still required for cable and system protection.
Confirm the final low-voltage and charging settings for the selected inverter before commissioning.
25.6V Power Storage Data
| Nominal Energy Platform | 25.6V / 100Ah / 2.56kWh |
| Float-Charge Voltage | 28.0Vdc |
| Charging Limit | 50A Continuous Maximum |
| Discharge Limits | 100A Continuous / 150A for 1 Second |
| Terminal Type | M8 |
| Battery Protection | Overcharge / Overdischarge / Overcurrent / Short Circuit / Overtemperature |
| Product Data | 522 × 242 × 218mm / 20.2kg |
| Environmental Data | IP65 / -10°C to 50°C / 0–95% Non-Condensing |
| Safety Documents | UN38.3 / MSDS |
100A 25.6V Battery FAQ
Can it power a 25.6V DC load directly?
Only when the equipment voltage range and current demand are compatible with the battery.
Can it continuously supply 150A?
No. The continuous limit is 100A.
Is a 28V charger suitable automatically?
The full charger profile and current behavior must be reviewed, not only the nominal voltage label.
Does the BMS protect the cables?
External protection should be selected to protect the cables and system components.
What information is required for a technical review?
Provide charger settings, load current, cable length, protection ratings and operating environment.
Current and Charger Review
Need to confirm a 25.6V charger or inverter setting?
25.6V 100Ah Lithium Battery
,Deep Cycle LiFePO4 Lithium Battery
,IP65 LiFePO4 Lithium Battery
Customer Service
- Email: info@voltertechenergy.com
- Tel: +86 13600078043
- WhatsApp: 8613600078043
-
WeChat:
voltertech
-
12kW 15kWh All In One Stackable Energy Storage System Three Module
Three - Module 12kW 15kWh All In One Energy Storage System with Dual MPPT High - Power All In One ESS with a Compact Battery Stack This 12kW 15kWh all in one energy storage system combines a pure sine wave inverter, three stackable battery modules, dual MPPT solar charging, dual AC output and WiFi ... -
6kW 16kWh All In One Home Energy Storage System With Dual MPPT
6kW 16kWh All In One Energy Storage System with Dual MPPT for Home Backup Integrated Solar Storage for Residential Projects This 6kW 16kWh all in one energy storage system integrates a hybrid inverter, battery storage, dual MPPT solar charging, system communication and WiFi monitoring within one ... -
10.24kWh 51.2V 200Ah Residential LiFePO4 Battery With CAN RS485 Communication
10.24kWh 51.2V 200Ah Residential LiFePO4 Battery with CAN RS485 Communication This residential LiFePO4 battery provides 10.24kWh of nominal energy from a 51.2V 200Ah configuration. It is designed as the battery-storage section of a compatible home solar, backup or off-grid energy system. Optional ...
