15.36kWh 51.2V Rack Mount LiFePO4 Battery With Side Cable Outlet

15.36kWh 51.2V Rack Mounted LiFePO4 Battery with Side Cable Outlet

This 15.36kWh rack mounted LiFePO4 battery provides a high-capacity 51.2V, 300Ah storage platform for large homes, farms, offices and light commercial backup projects.

Although classified as a rack-format battery product, the specification lists floor mounting for this larger cabinet. Its side cable outlet supports placement beside compatible inverter and distribution equipment.

High Capacity within One Battery Cabinet

The 15.36kWh capacity reduces the number of separate battery modules required for projects targeting a larger energy reserve. It can store daytime solar production or maintain planned backup energy for selected circuits.

Battery capacity does not determine maximum AC load. The external inverter controls AC output, while the battery capacity influences the potential operating period.

Side Cable Arrangement for Equipment Rooms

Power cables exit from the side of the cabinet, allowing the battery to be positioned beside the inverter, busbar or protection equipment when sufficient side clearance is reserved.

The cabinet measures 750 × 483 × 250mm and weighs approximately 108kg. Delivery access, floor condition and cable routing should be reviewed before shipment.

Current Support for Larger Low-Voltage Systems

Rated charge and discharge current is 100A. Higher references include 200A continuous current and 205A for 10 seconds.

The listed battery power is 5.12kW rated, 10.24kW continuous and 10.50kW for 10 seconds. These battery-side ratings must be coordinated with the external inverter, cables and protection devices.

Communication and Battery Bank Expansion

RS485, RS232 and CAN interfaces support compatible inverter communication. Six units are recommended for common parallel projects, with up to sixteen batteries listed as supported.

The IP21 enclosure requires a dry indoor or protected equipment room. Optional Bluetooth or WiFi monitoring should be confirmed during quotation.

15.36kWh Rack-Format Battery Specifications

Equipment Room Layout FAQ

Why is the installation mode listed as floor mounting?

The larger 108kg cabinet is intended to stand on a suitable floor rather than be supported by a standard rack shelf.

How much side clearance should be planned?

Reserve enough space for cable bending, communication connections, protection devices and service access.

What does the 300Ah capacity provide?

It contributes to the 15.36kWh nominal energy reserve available on the 51.2V platform.

Can the 200A current reference be used continuously?

It is listed as a continuous reference, but actual settings must follow the inverter, temperature, battery state and project design.

What information is needed for equipment-room planning?

Provide the room layout, cable route, inverter model, load demand, backup target and delivery access dimensions.

Prepare the Battery and Inverter Layout