10.24kWh 51.2V Wall Mounted LiFePO4 Battery With 200A Current Capability

10.24kWh 51.2V Wall Mounted LiFePO4 Battery with 200A Current Capability

This 10.24kWh wall mounted LiFePO4 battery provides a higher-capacity storage option for residential solar systems, office backup, communication equipment, security systems and other projects requiring a larger energy reserve within a 51.2V platform.

The battery is supplied as a standalone DC storage unit. A compatible external inverter or charger is required to manage solar charging, utility charging and AC load output.

Higher Energy Capacity in a Wall-Mounted Format

With 10.24kWh of nominal energy, this wall mounted lithium battery provides twice the storage capacity of a typical 5.12kWh module. It is suitable for buyers who want longer backup operation or greater daytime solar-energy storage without installing multiple smaller batteries.

The available operating period depends on the connected loads, inverter efficiency, battery settings and retained reserve. Capacity should be selected from the project’s daily energy consumption rather than inverter power alone.

Current Capability for Larger Inverter Systems

The rated charging and discharging current is 100A. The specification also lists a 200A continuous current reference and 205A for 10 seconds, supporting projects with higher DC current requirements when the inverter, cables and protection equipment are correctly matched.

Rated charging and discharging power is 5.12kW, while the higher power reference is listed as 10.24kW continuous and 10.50kW for 10 seconds. Actual operating values can vary with battery state of charge, temperature and system configuration.

The inverter should support the battery’s 44.8–58.4V operating range. Its charging voltage, discharge settings and maximum battery current must be reviewed before ordering.

Communication, Monitoring and Capacity Growth

RS485, RS232 and CAN interfaces provide communication options for compatible inverter and monitoring equipment. The inverter model and supported battery protocol should be confirmed during project selection.

Bluetooth is available as an optional configuration, while Wi-Fi is listed for remote battery data. The required wireless monitoring arrangement should be confirmed during quotation.

The specification recommends six batteries for common parallel projects and supports up to sixteen units. Larger battery banks require compatible inverter settings, protection equipment, cables and communication coordination.

Structural Planning for a 98kg Wall Battery

The enclosure measures 780 × 450 × 181mm and weighs approximately 98kg. The supporting wall or equipment structure must be suitable for the battery weight, with sufficient space for the bottom cable outlet and future service access.

Its IP21 protection level requires a dry indoor or protected technical location. The battery should remain protected from rain, direct water exposure and condensation.

10.24kWh Wall Mounted Battery Specifications

10.24kWh Wall Battery FAQ

What is the main difference from a 5.12kWh wall battery?

This battery provides twice the nominal energy and a higher listed current capability, making it suitable for larger storage requirements.

Does the 10.24kW battery reference guarantee 10.24kW of AC output?

No. AC output is determined by the external inverter, its efficiency, battery settings and the connected load conditions.

Can it be used for communication or security-system backup?

Yes, when the load requirements, required backup period and inverter configuration are compatible with the battery.

What should be checked before adding it to an existing battery bank?

Confirm battery compatibility, age and condition, inverter settings, communication addressing, cables and protection equipment.

What storage conditions are listed for this battery?

The listed storage range is -10°C to 25°C for periods below three months and 0°C to 25°C for periods below one year.

Evaluate a Higher-Capacity Wall Battery