5kW 48V Hybrid Solar Inverter With 7.5kW Dual MPPT IP66 Protection

5kW 48V Hybrid Solar Inverter with 7.5kW Dual MPPT and IP66 Protection

Hybrid Solar Inverter for Residential Energy Management

This 5kW 48V hybrid solar inverter combines photovoltaic generation, battery storage, grid-connected self-consumption and a dedicated backup output in one wall-mounted energy platform.

The inverter provides 5kW of on-grid AC output and a separate 5kW backup output at 230Vac. It is suitable for residential properties, home offices and light-commercial sites that need to manage solar energy while keeping selected circuits available during a utility interruption.

A maximum photovoltaic input of 7.5kW provides additional solar-array capacity for daytime consumption and battery charging. Two independent MPPT trackers make the inverter practical for roofs with separate panel groups or different installation orientations.

Dual MPPT Solar and Backup Advantages

PV String and Backup Circuit Planning

The photovoltaic startup voltage is 90Vdc, and the normal MPPT operating range is 80–520Vdc. For full-power operation, the listed MPPT range for this 5kW version is 197–500Vdc.

Maximum PV open-circuit voltage is 550Vdc. Each MPPT supports up to 19A of input current, with a listed short-circuit-current limit of 25A per tracker.

Solar string design should consider module operating voltage, open-circuit voltage, current and temperature coefficient. Cold-weather open-circuit voltage must remain below the inverter limit.

The backup output should be connected to planned priority circuits rather than every appliance in the property. Combined continuous demand should remain within 5kW, while motor-driven equipment should be checked for startup and overload requirements.

Hybrid Solar Inverter Specifications

5kW Dual MPPT Hybrid Inverter FAQ

Can a 7.5kW photovoltaic array be connected?

Yes. The listed maximum photovoltaic input is 7.5kW, provided both strings remain within the specified voltage, current and short-circuit-current limits.

Can panels facing different directions use separate MPPT inputs?

Suitable separate strings may be connected to the two trackers when each MPPT remains within its approved electrical limits.

What should be connected to the backup output?

Installers normally select priority circuits such as lighting, refrigeration, communication devices, security systems and essential office equipment.

Does the backup output provide more than 5kW?

The listed nominal and apparent backup output are 5kW and 5kVA. Continuous connected demand should remain within this rating.

Can the IP66 inverter be installed outdoors?

It supports protected outdoor installation when the required mounting position, cable sealing, ventilation clearance and environmental instructions are followed.

Residential Hybrid Solar Project Support

This 5kW hybrid solar inverter is suitable for distributors, residential installers and system integrators requiring dual MPPT solar input, battery backup and IP66 enclosure protection.