Français
Deutsch
Italiano
Русский
Español
Português
Nederlandse
Ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
Indonesia
Tiếng Việt
ไทย
বাংলা
فارسی
Polski
5kW 24V Solar Power Inverter With 9kW MPPT Input 9 Unit Parallel Support
5kW 24V Solar Inverter with 9kW MPPT Input and 9-Unit Parallel Support
Expandable Solar Inverter for Higher-Power Projects
This 5kW 24V solar inverter combines pure sine wave AC output, a 9kW MPPT solar charger, compatible AC input, battery charging and parallel expansion in one single-phase power platform.
The inverter provides 5kW of continuous output and 10kVA of short-duration surge power. It can be considered for lighting, refrigeration, computers, communication equipment, televisions, office devices and compatible motor-driven loads after their running and startup requirements have been checked.
Up to nine compatible inverter units can be configured in parallel for projects that require a larger power platform or future expansion. Parallel installation must follow the approved communication, wiring, protection and commissioning requirements.
Solar Input, Surge Capacity and Parallel Expansion
9kW Photovoltaic Input
The MPPT charger supports up to 9000W of photovoltaic input with a listed maximum PV input current of 27A.
10kVA Starting Headroom
Short-duration surge capacity provides additional starting headroom for compatible compressors, pumps and other motor-driven equipment.
Nine-Unit Parallel Capability
Compatible units can be combined for expandable projects when the complete parallel-system design follows the manufacturer’s requirements.
Flexible AC Voltage Options
The inverter supports 208, 220, 230 and 240Vac output settings for compatible single-phase electrical systems.
PV String and Load Planning
The photovoltaic array must operate within the 80–450Vdc MPPT voltage window. Total PV open-circuit voltage must remain below 500Vdc under all expected conditions, including the increase in panel voltage during colder weather.
The 27A photovoltaic input-current limit must also be considered when selecting panel quantity and string arrangement. The final design should be based on module voltage, current, temperature coefficient and local installation conditions.
The combined continuous AC load should remain within 5kW. The 10kVA surge specification is intended for short-duration starting demand and does not mean that the inverter can continuously supply 10kW.
Parallel projects require coordinated AC wiring, DC battery capacity, communication cables, protection devices and matching inverter settings. Parallel quantity should be selected according to the actual load schedule rather than the maximum supported number alone.
Electrical and Installation Specifications
| AC Input | 208 / 220 / 230 / 240Vac; L + N + PE |
| AC Input Range | 90–280Vac Normal Mode / 170–280Vac UPS Mode |
| Output Performance | 5kW Continuous / 10kVA Surge / PF 1.0 |
| Waveform and Transfer | Pure Sine Wave / 10ms Normal Mode / 10ms UPS Mode |
| Maximum PV Input | 9000W / 27A |
| PV Voltage Limits | 80–450Vdc MPPT / 500Vdc Maximum Open-Circuit Voltage |
| Parallel Quantity | Up to 9 Compatible Units |
| Monitoring and Communication | LCD / RS485 / RS232 / USB / Optional WiFi |
| Installation Data | IP21 / -10°C to 50°C / 392.5 × 325 × 130mm / 8.5kg |
The formal parameter table confirms compatible AC input and battery charging functions. This page does not claim electricity selling, grid export or generator compatibility.
5kW Parallel Solar Inverter FAQ
Can the inverter continuously provide 10kW?
No. Continuous output is 5kW. The 10kVA specification represents short-duration surge capacity for compatible starting loads.
Can a 9kW photovoltaic array be connected?
The MPPT charger supports up to 9000W and 27A, provided the complete array remains within the 80–450Vdc operating range and 500Vdc open-circuit-voltage limit.
How many inverter units can be connected in parallel?
The formal specification lists support for up to nine compatible units. Final parallel quantity depends on the load design and approved installation method.
Can it start a pump or air conditioner?
Compatible equipment may be supported when its running power, startup demand and combined load remain within the inverter limits.
Is WiFi monitoring included as standard?
WiFi monitoring is listed as optional. The standard communication interfaces shown in the specification are LCD, RS485, RS232 and USB.
Expandable Solar Inverter Project Support
This solar inverter is suitable for distributors, installers and system integrators requiring higher photovoltaic input, strong starting-load capacity and future parallel expansion.
Planning a 5kW solar project with future parallel expansion?
5kW Solar Power Inverter
,24V Solar Power Inverter
Customer Service
- Email: info@voltertechenergy.com
- Tel: +86 13600078043
- WhatsApp: 8613600078043
-
WeChat:
voltertech
-
6kW 16kWh All In One Energy Storage System For Residential Backup Power
This 6kW 16kWh all in one energy storage system integrates an inverter, battery, MPPT charger, LCD and WiFi monitoring in one cabinet. It provides 14.4kWh usable energy, accepts up to 9kW PV input and supports 10ms transfer for residential backup and weak-grid projects. -
Stackable Modular LiFePO4 Energy Storage Battery All In One 15.36kWh 3.6kW
15.36kWh 3.6kW All in One Energy Storage System with Modular LiFePO4 Stack This all in one energy storage system combines a 15.36kWh LiFePO4 battery stack with a 3.6kW pure sine wave inverter and MPPT charging. It is the largest battery configuration in this series and is designed for projects where ... -
7.68kWh 4kW All In One ESS / Solar Energy Storage System With 5kW PV Input
7.68kWh 4kW All in One Solar Energy Storage System with 5kW PV Input This all in one solar energy storage system combines a 7.68kWh LiFePO4 battery, a 4kW inverter and a 5kW photovoltaic input section inside one floor-standing cabinet. It is suitable for homes, small offices, shops, communication ...
